We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with LC duplex port, matte metal housing, side label visible

Axiom

Axiom SRX-SFPP-10G-SR-ET-AX 10GBASE-SR SFP+ transceiver

SKU CH-ZH3S-RYCCW

A 10GBASE-SR SFP+ transceiver operating at 850nm over multi-mode fibre for distances up to 300m, compliant with SFP+ MSA and IEEE 802.3ae standards

  • Device TypeTransceiver
  • Wavelength850nm
  • Fiber CableMulti-mode Optical Fiber
  • Max Distance300m
  • FeatureData-rate: 10GBASE-SR Form-factor: SFP+ Connector: LC Compli
  • 10 Gbps data rate for high-speed links
  • 850 nm wavelength on multi-mode fibre
  • 300 m reach for short-range connections
  • SFP+ MSA and IEEE 802.3ae compliant
  • RoHS compliant and serialized for traceability

Juniper-compatible 10GBASE-SR transceiver

The Axiom SRX-SFPP-10G-SR-ET-AX is an SFP+ transceiver built for 10 Gigabit Ethernet links over multi-mode fibre. It operates at an 850nm wavelength and supports distances up to 300 metres. The module follows the SFP+ MSA, RoHS and IEEE 802.3ae standards for broad switch and router compatibility.

Replaces vendor-branded SR optics

This unit substitutes the original Juniper SRX-SFPP-10G-SR-ET module in any MSA-compliant slot. The jump is worth it when you need a direct-replacement part that carries the same 10GBASE-SR data-rate and 300-metre reach without paying the OEM premium. It is not for links that require single-mode fibre or longer reach.

Check slot type and fibre plant

Verify that the target device accepts SFP+ form-factor modules and that your patch cables use LC connectors with multi-mode fibre rated for 850nm. Confirm the link distance does not exceed 300 metres and that the host port is configured for 10GBASE-SR operation.

Highlights

  • 10 Gbps data rate for high-speed links
  • 850 nm wavelength on multi-mode fibre
  • 300 m reach for short-range connections
  • SFP+ MSA and IEEE 802.3ae compliant
  • RoHS compliant and serialized for traceability

Specifications

BrandAxiom
ModelSRX-SFPP-10G-SR-ET-AX
Device TypeTransceiver
Wavelength850nm
Fiber CableMulti-mode Optical Fiber
Max Distance300m
FeatureData-rate: 10GBASE-SR
Form-factor: SFP+
Connector: LC
Compliant Standards
SFP+ MSA Compliant
RoHS Compliant
IEEE 802.3ae

Questions about this item

What patch-cable type and connector does the 850 nm SFP+ need for a 300 m link?

Multi-mode fibre with LC duplex connectors is required for the 850 nm wavelength and 300 m reach.

How is the module seated in a Juniper SRX port and what step is often missed?

Slide the transceiver in until the latch clicks; the common miss is not removing the dust caps before insertion.

When should the LC ferrules be cleaned on this 10GBASE-SR optic?

Clean the ferrules with a fibre scope and lint-free swabs whenever the module is removed or if link errors appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.