Axiom
Axiom MPO Female to MPO Female OM4 50/125 Fibre Optic Cable 30m
A 30-metre OM4 multimode fibre cable with 50/125 µm core/cladding, aqua jacket and dual MPO female connectors for high-density network links
- TypeNetwork Cable
- ColorAqua
- Length98.43 ft
- Connector Detail2 x MPO Female Network
- OM4 50/125 µm multimode fibre supports high-bandwidth data links
- 30 m aqua jacket enables quick visual identification in dense racks
- Dual MPO female connectors provide direct patch-panel-to-panel connectivity
- Flame-retardant LSZH construction meets RoHS environmental requirements
- Integrated locking latches secure each connection against accidental disconnection
30 m OM4 Multimode Fibre Cable
This 30 metre aqua cable uses 50/125 µm multimode fibre terminated with MPO female connectors on both ends. It is built for high-density patching between network switches, transceivers or cassette modules in data-centre environments.
Suits installers needing MPO-to-MPO links
The dual MPO female interface means it cannot connect directly to LC or SC ports without a separate cassette or adapter panel. Buyers who need single-mode fibre, different connector types or shorter reach cables should look at other options.
MPO female-to-female 50/125 µm construction
The 50/125 µm core/cladding diameter and OM4 multimode rating determine the supported bandwidth and distance for the target link. Flame-retardant jacket and RoHS compliance complete the specification.
Highlights
- OM4 50/125 µm multimode fibre supports high-bandwidth data links
- 30 m aqua jacket enables quick visual identification in dense racks
- Dual MPO female connectors provide direct patch-panel-to-panel connectivity
- Flame-retardant LSZH construction meets RoHS environmental requirements
- Integrated locking latches secure each connection against accidental disconnection
Specifications
| Brand | Axiom |
|---|---|
| Type | Network Cable |
| Color | Aqua |
| Length | 98.43 ft |
| Connector Detail | 2 x MPO Female Network |
Questions about this item
What equipment needs MPO female ports to connect this 30 m OM4 cable?
Both devices must present MPO female interfaces; the cable provides male MPO connectors on each end to mate with them.
Will this OM4 50/125 µm cable work with existing OM3 patch panels and transceivers?
Yes, OM4 is backwards compatible with OM3 hardware; the 50/125 µm core matches and the aqua jacket identifies the multimode grade.
How can I confirm the link is performing correctly after installation?
Run a multimode insertion-loss test at the specified wavelength; the measured loss should fall within the OM4 budget for a 30 m 50/125 µm run.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



