Axiom
Axiom MPO Female to MPO Female OM4 50/125 Fibre Optic Cable 20m
A 20-metre multimode OM4 cable with 50/125 µm core and dual MPO female connectors for high-density network links
- TypeNetwork Cable
- ColorAqua
- Length65.62 ft
- Connector Detail2 x MPO Female Network
- OM4 multimode fibre enables high-bandwidth data links
- 20 metre length suits rack-to-rack and cross-connect runs
- Dual MPO female connectors mate directly with parallel optics modules
- Aqua jacket identifies OM4 cable at a glance in dense panels
- RoHS compliant and flame-retardant for regulated environments
20-metre OM4 multimode fibre cable
This 20-metre OM4 multimode fibre cable uses a 50/125 µm core and aqua jacket. It terminates in MPO female connectors on both ends for high-density patching in data-centre and enterprise networks. The cable is flame-retardant and RoHS compliant.
Locking MPO connectors and aqua identification
Each end carries two MPO female connectors equipped with locking latches that resist accidental disconnection. The aqua colour follows the OM4 multimode convention so technicians can identify the cable type at a glance. Flame-retardant construction and RoHS compliance meet typical building and environmental requirements.
Suits high-density multimode links.
The cable suits installers who need pre-terminated OM4 links between MPO patch panels or transceivers. It does not suit single-mode infrastructure, installations requiring male MPO connectors, or runs longer than the supplied 20-metre length.
Highlights
- OM4 multimode fibre enables high-bandwidth data links
- 20 metre length suits rack-to-rack and cross-connect runs
- Dual MPO female connectors mate directly with parallel optics modules
- Aqua jacket identifies OM4 cable at a glance in dense panels
- RoHS compliant and flame-retardant for regulated environments
Specifications
| Brand | Axiom |
|---|---|
| Type | Network Cable |
| Color | Aqua |
| Length | 65.62 ft |
| Connector Detail | 2 x MPO Female Network |
Questions about this item
Will the OM4 50/125 multimode fibre need polishing or re-termination after repeated mating cycles?
The MPO female connectors feature a locking latch that maintains alignment during repeated insertions, reducing wear on the 50/125 µm fibre end-faces.
What limits the usable bandwidth first when the 20 m link runs at maximum throughput?
The OM4 50/125 µm multimode fibre itself sets the modal-dispersion distance limit for the supported data rates.
Does the aqua-coloured LSZH jacket add measurable heat to a rack when the cable carries traffic all day?
The passive fibre assembly has no active components, so it contributes no heat or power draw regardless of traffic load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



