We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Axiom GLC-TE-AX SFP transceiver module with LC connector in black finish

Axiom

Axiom GLC-TE-AX 1000Base-T SFP Transceiver 40km

SKU CH-1JR5-Z8Q7V

An SFP transceiver delivering 1000 Mbps over twisted pair up to 40 km with 1310 nm wavelength

  • Device TypeTransceiver
  • Wavelength1310nm
  • ProtocolsTCP/IP
  • Max Distance40km
  • FeatureData-rate: 1000BASE-EX (LX 40km) Form-factor: SFP Connector:
  • 1000 Mbps data rate over twisted pair cable
  • 40 km reach on single-mode fibre at 1310 nm wavelength
  • SFP form factor with LC duplex connector
  • MSA compliant for use in all MSA platforms
  • Pre-coded for 100 % OEM compatibility with unique serialisation

Axiom GLC-TE-AX SFP Transceiver

The Axiom GLC-TE-AX is a Small Form-factor Pluggable transceiver built for 1000BASE-EX links over single-mode fibre. It targets network engineers who need to extend Gigabit Ethernet connections across campus or metro distances using standard LC duplex cabling. The module arrives pre-coded for Cisco equipment and carries a unique serialisation that prevents address conflicts in dense chassis deployments.

40 km reach at 1310 nm wavelength

Operating at 1310 nm, the transceiver delivers a 1000 Mbps data rate across spans up to 40 km, providing ample headroom for building-to-building or campus backbone runs. Signal budget is consumed by fibre attenuation, connector loss and patch-panel margins; beyond the rated distance the link will drop packets or fail to establish, so accurate loss budgeting is essential before deployment.

SFP MSA compliance and LC duplex interface

The module follows the multi-source agreement, allowing it to operate in any MSA-compliant switch or router slot without vendor lock-in. Its LC duplex connector mates with standard single-mode patch cords, but the SFP cage itself limits density compared to newer QSFP form factors. Users requiring higher port counts or 10 Gbps speeds must select a different transceiver family.

Highlights

  • 1000 Mbps data rate over twisted pair cable
  • 40 km reach on single-mode fibre at 1310 nm wavelength
  • SFP form factor with LC duplex connector
  • MSA compliant for use in all MSA platforms
  • Pre-coded for 100 % OEM compatibility with unique serialisation

Specifications

BrandAxiom
ModelGLC-TE-AX
Device TypeTransceiver
Wavelength1310nm
ProtocolsTCP/IP
Max Distance40km
FeatureData-rate: 1000BASE-EX (LX 40km)
Form-factor: SFP
Connector: LC
Shipping weight0.64 kg
Package size102 × 76 × 51 mm

Questions about this item

Will the GLC-TE-AX work with my existing LC patch cords and 1310 nm single-mode fibre plant?

Yes, the transceiver uses an LC duplex connector and operates at 1310 nm, so it connects directly to standard single-mode patch cords already in your rack.

What front-panel indicators confirm the module is linked at 1000BASE-EX after I install it?

The host switch will show a solid link LED on the SFP port and the port status will report 1000 Mb/s full-duplex once the 40 km link is established.

Does the package include the LC fibre cables or must I order them separately?

Only the SFP transceiver module is supplied; LC duplex single-mode patch cords for the 40 km run must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.