We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network converter box with RJ45 and open SFP ports, matte black finish

Axiom

Axiom AXG99744 100 Mbs POE RJ45 to SFP Media Converter

SKU CH-15PE-H19MS MPN AXG99744

Converts 10/100Base-TX UTP to 100Base-FX fiber with IEEE 802.3af PoE PSE power over copper up to 100 metres

  • TAA-compliant for government procurement
  • 10/100Base-TX UTP to 100Base-FX fiber conversion
  • IEEE 802.3af PoE PSE powers devices over CAT5e/CAT6
  • Built-in AC/DC supply with over-current protection
  • DIP switch and LFP support for flexible configuration

TAA-compliant PoE media converter

The Axiom AXG99744 bridges 10/100Base-TX copper networks to 100Base-FX fibre links while supplying Power over Ethernet to compatible devices. It meets IEEE 802.3 af requirements and carries TAA compliance for government and regulated projects. The built-in AC/DC supply removes the need for an external adapter. Installers can deploy it in equipment rooms or cabinets where fibre uplinks and powered endpoints coexist.

Thermals noise and power draw

The unit operates from an internal AC/DC power supply with over-current protection fitted as standard. No fan is mentioned in the specifications, so the converter runs without active cooling noise. Power consumption scales with the attached PoE load, delivering up to 48 V to the powered device over copper runs of up to 100 metres or 330 feet. The design targets continuous operation in typical indoor networking environments.

DIP switches and link fault pass-through

A row of DIP switches lets technicians set operating modes without software tools or a management interface. Link Fault Pass-through propagates a loss of signal from the fibre side to the copper port and vice versa, so monitoring systems detect the break immediately. An open SFP port accepts the transceiver module required for the specific fibre type and distance. These features reduce commissioning time and simplify ongoing maintenance.

Highlights

  • TAA-compliant for government procurement
  • 10/100Base-TX UTP to 100Base-FX fiber conversion
  • IEEE 802.3af PoE PSE powers devices over CAT5e/CAT6
  • Built-in AC/DC supply with over-current protection
  • DIP switch and LFP support for flexible configuration

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the AXG99744 and what step do people often miss?

Connect the RJ45 port to the powered device using CAT5e or CAT6 cable up to 100 meters, insert an SFP module into the open port, and set the DIP switches for LFP or PoE mode before powering on; the step often missed is configuring the DIP switches first.

What maintenance or replacement will the AXG99744 need later?

The SFP module is field-replaceable and may need swapping if the fiber link changes; the built-in AC/DC supply and over-current protection are internal with no user-serviceable parts.

What limit appears first under sustained PoE load on the AXG99744?

The 100 Mbps fiber link and IEEE 802.3af 48 V power budget cap simultaneous data and PoE delivery before thermal limits engage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.