We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular QSFP28 transceiver module, matte metal finish with MPO-12 port visible

Axiom

Axiom AXG100454 100GBASE-SR4 QSFP28 SFP transceiver

SKU CH-VZFS-P7V2G MPN AXG100454

100 Gbps QSFP28 transceiver for 850 nm multimode fibre up to 100 m with MPO-12 interface

  • 100 Gbps throughput for high-density links
  • 100 m reach over OM4 multimode fibre
  • 850 nm VCSEL wavelength optimised for short-range
  • QSFP28 form factor fits standard 28 Gbaud cages
  • MPO-12 interface enables 12-fibre parallel connectivity

Compatible transceiver for Fortinet equipment

The Axiom AXG100454 is a QSFP28 transceiver built for Fortinet networking gear. It provides a 100 Gbps link over multimode fibre using an MPO-12 connector. Network engineers upgrading data-centre spines or leaf switches will find it matches the required form factor and wavelength.

Low heat and power in normal operation

Running at 850 nm across short multimode runs, the module stays cool and draws minimal power during typical daytime traffic. The SR4 design keeps signal integrity high without the thermal load of longer-reach optics. Fan noise in the host chassis remains unchanged under standard loads.

Stable output over sustained 100-metre links

Under continuous 100 Gbps throughput the transceiver maintains its rated 100 metre reach without error-rate drift. The MPO-12 interface and 850 nm VCSEL array keep lane alignment steady during extended transfers. It is not suited for single-mode fibre or distances beyond the specified multimode limit.

Highlights

  • 100 Gbps throughput for high-density links
  • 100 m reach over OM4 multimode fibre
  • 850 nm VCSEL wavelength optimised for short-range
  • QSFP28 form factor fits standard 28 Gbaud cages
  • MPO-12 interface enables 12-fibre parallel connectivity

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the AXG100454 QSFP28 module and which MPO-12 polarity step is often missed?

Insert the module until it clicks, then connect an MPO-12 cable with correct Type-B polarity so TX fibres map to RX on the far end.

What maintenance or replacement will the AXG100454 need over time?

Inspect and clean the MPO-12 connector end-faces periodically; replace patch cords if insertion loss exceeds the 100 m link budget.

What limit appears first on the AXG100454 during sustained 100 Gbps traffic?

The 100 m reach on OM4 multimode fibre at 850 nm is the first constraint; longer runs require single-mode optics.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.