We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with LC ports and gold edge connector

Axiom

Axiom 7006-0-Z-AX SFP Transceiver 100 Gbps 1310nm

SKU CH-K0XP-6GYWC MPN 7006-0-Z-AX

SFP transceiver delivering 100 Gbps over multi-mode fibre at 1310 nm with LC connectors up to 5 km

  • 100 Gbps throughput for high-speed network links
  • 1310 nm wavelength optimised for 5 km multimode fibre runs
  • SFP form factor enables hot-swap deployment in compatible slots
  • LC duplex interface ensures secure, low-loss fibre connections
  • Purpose-built for Omnitron equipment using part 7006-0-Z-AX

100 Gbps SFP Transceiver

The Axiom 7006-0-Z-AX is a 100 Gbps SFP transceiver designed for OMNITRON equipment. It operates at 1310nm wavelength over multi-mode fibre with LC duplex connectors. Network engineers use it to extend 100 Gigabit Ethernet links up to 5 km within data centre or campus environments. The module plugs directly into a compatible SFP cage.

Hot-plug SFP installation

The transceiver uses the standard SFP form factor for hot-plug insertion without powering down the host switch. Alignment of the LC ferrules is critical; contamination or angled insertion causes immediate link failure. Verify that the host port supports the required 100 Gbps signalling rate before deployment. Mismatched firmware revisions between module and switch can prevent the link from initialising.

Sustained 100 Gbps throughput

Under continuous load the module maintains the full 100 Gbps data rate across the 5 km multi-mode path. Optical budget is calibrated for steady-state operation rather than burst tolerance. Thermal output remains stable inside the SFP cage during prolonged transmission. The 1310nm laser wavelength is optimised for consistent reach without signal degradation over time.

Highlights

  • 100 Gbps throughput for high-speed network links
  • 1310 nm wavelength optimised for 5 km multimode fibre runs
  • SFP form factor enables hot-swap deployment in compatible slots
  • LC duplex interface ensures secure, low-loss fibre connections
  • Purpose-built for Omnitron equipment using part 7006-0-Z-AX

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the Axiom 7006-0-Z-AX SFP transceiver is operating correctly after installation?

Check the link status LEDs on the connected Omnitron equipment; a solid green light indicates a valid 100 Gbps connection over the 1310nm wavelength.

What components are included with the Axiom 7006-0-Z-AX transceiver and what must be purchased separately?

The transceiver module itself is supplied; LC duplex patch cables and compatible Omnitron switches or media converters must be sourced separately.

Which version of the Axiom 7006-0-Z-AX should I select for a 5 km multimode fibre link?

Choose the 100 Gbps 1310nm model 7006-0-Z-AX, which is rated for up to 5 km over multimode fibre with LC connectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.