We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel scissor microphone arm with clamp, pop filter and mic clip visible

Avid T20 Microphone Arm Stand 700mm 1.8kg load

SKU CH-PAE0-3W4M1

Adjustable steel boom arm with 700 mm reach, 1.8 kg capacity, 360° rotation and integrated pop filter

  • Length18 ft.
  • Specification13.8inch length, Pedestal, 27.55 inches, Matte
  • Feature13.8inch length
  • Dimension14.33in W x 12.83in H x 9.06in D
  • Weight807 grams
  • Supports microphones up to 1.8 kg with steel construction
  • Clamps desks up to 60 mm thick and includes headset hook
  • Reaches 700 mm horizontally or vertically with 360° rotation
  • Includes pop filter, foam cover, mic clip, adapter and cable ties
  • Weighs 807 g for stable yet movable desktop mounting

Heavy-duty steel microphone arm

The Avid T20 is a steel boom arm built for streamers, podcasters and voice-over artists who need a stable desk-mounted solution. It supports microphones up to 1.8 kg and reaches 700 mm in both horizontal and vertical directions. The arm rotates 360° for precise positioning.

Bundled accessories for immediate use

A pop filter and foam cover are included to reduce plosives and wind noise during recording. The package also supplies a 3/8" to 5/8" adapter, a mic clip, four cable ties and a headset hook integrated into the clamp. Everything needed for a typical desktop setup ships in one box.

Desk clamp fits thick surfaces

The upgraded clamp provides four times the contact area and accepts desks up to 60 mm thick, keeping the arm firmly anchored. Steel rods measuring 12 mm wide and 1 mm thick give the structure its rigidity. The arm weighs 807 grams and folds to a compact footprint of 14.33 in wide by 12.83 in high by 9.06 in deep.

Highlights

  • Supports microphones up to 1.8 kg with steel construction
  • Clamps desks up to 60 mm thick and includes headset hook
  • Reaches 700 mm horizontally or vertically with 360° rotation
  • Includes pop filter, foam cover, mic clip, adapter and cable ties
  • Weighs 807 g for stable yet movable desktop mounting

Specifications

BrandAvid
Model120104
Part NumberT20
Length18 ft.
Specification13.8inch length, Pedestal, 27.55 inches, Matte
Feature13.8inch length
Dimension14.33in W x 12.83in H x 9.06in D
Weight807 grams

Questions about this item

Does the steel scissor arm or the desk clamp need any periodic tightening or lubrication?

The arm uses high-grade steel rods with upgraded 12 mm width and 1 mm thickness plus super-tension springs rated for 80 % higher load capacity; no lubrication schedule is required, just check the clamp thumb-screws occasionally.

What stops the arm from sagging when a 1.8 kg microphone is mounted at full 700 mm reach?

Super-tension springs inside the 35 cm + 35 cm boom sections counter-balance the 1.8 kg maximum load, preventing sag even at full horizontal extension.

Does the clamp or arm generate any mechanical noise or heat during all-day streaming sessions?

All joints are steel-on-steel with internal springs, so there is no motor, fan or electronic heat; the design targets zero vibration noise during use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.