We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black alloy steel microphone stands with weighted round bases and detachable boom arms, height adjustable 34 to 60 inches

Avid MS250D Microphone Stand 2 Pack 34-60in Black

SKU CH-JNFR-TKT7X

Two black alloy-steel floor stands with detachable boom arms adjust from 34 to 60 inches and include a 4.5 lb weighted base with non-slip pads

  • FinishBlack
  • MaterialsAlloy Steel, Iron
  • Length18 ft.
  • SpecificationTwist Clutch 34" - 60", Alloy Steel, Iron, Flat, 60 inches
  • FeatureTwist Clutch 34" - 60"
  • Dimension14.33in W x 12.83in H x 9.06in D
  • Adjustable height from 34 to 60 inches suits seated or standing use
  • Twist clutch enables quick one-handed height changes
  • Detachable boom arm extends positioning options for any microphone
  • Heavy 4.5 lb round base with non-slip pads resists tipping
  • Thickened 1.5 mm steel arm supports heavier microphones without bending

Two-Pack Floor Stands

This two-pack supplies a pair of black alloy-steel microphone stands for studio, stage or home recording. Each stand weighs 14.07 pounds and uses a 4.5 lb weighted round base with non-slip pads and a metal gasket to resist wobble. The detachable boom arm extends the mic position away from the stand centre. Singers, podcasters and instrumentalists gain a matched set for stereo or multi-source sessions.

Height Range and Load Capacity

Height adjusts from 34 to 60 inches via a twist clutch that locks the shaft at any point in the range. The boom arm is built from 1.5 mm thickened steel tube, rated for heavier microphones without bending. An 180° rotatable mic clip and included 3/8" to 5/8" adapter fit common large-diaphragm and dynamic models. Very long or exceptionally heavy broadcast mics may exceed the practical balance point.

Replaces Single Stands and Lighter Arms

Buyers moving up from single lightweight stands or thin-walled boom arms gain double the channels and a sturdier 1.5 mm arm in one purchase. The 4.5 lb base removes the need for sandbags in most fixed positions. Users who need desktop mounting, ultra-compact folding or a second independent boom per stand will require a different form factor.

Highlights

  • Adjustable height from 34 to 60 inches suits seated or standing use
  • Twist clutch enables quick one-handed height changes
  • Detachable boom arm extends positioning options for any microphone
  • Heavy 4.5 lb round base with non-slip pads resists tipping
  • Thickened 1.5 mm steel arm supports heavier microphones without bending

Specifications

BrandAvid
ModelMS250D
Part NumberMS250D
FinishBlack
MaterialsAlloy Steel, Iron
Length18 ft.
SpecificationTwist Clutch 34" - 60", Alloy Steel, Iron, Flat, 60 inches
FeatureTwist Clutch 34" - 60"
Dimension14.33in W x 12.83in H x 9.06in D
Weight14.07 pounds

Questions about this item

Will the MS250D work with my existing Shure SM58 and Blue Yeti microphones?

Yes, the stand includes a 3/8" to 5/8" screw adapter, making it compatible with both the SM58's 5/8" thread and the Yeti's 3/8" mount.

How do I verify the twist clutch and boom arm are holding securely after assembly?

Set the height between 34 and 60 inches, tighten the clutch, then rotate the boom 180°; the 1.5mm steel arm and metal gasket should keep the microphone fixed without drift.

What accessories come in the 2-pack box and what must I provide?

The package includes two stands with weighted 4.5 lb bases, two detachable boom arms, two 3/8" to 5/8" adapters, and two cable management clips; you only need to supply the microphones.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.