We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of silver steel clamp-on speaker stands with square top plates and height-adjustable columns

Avid Clamp-On Desktop Speaker Stands Pair 9-14" Height Adjustable 50 lbs

SKU CH-5YCJ-HQB7G

Clamp-on steel stands hold studio monitors up to 50 lbs each with four locking heights from 9 to 14 inches

  • Length18 ft.
  • Specification14 inches, 50 pounds, 9 L x 9 W x 14 H inches
  • Dimension14.33in W x 12.83in H x 9.06in D
  • Four locking heights from 9 to 14 inches position monitors at ear level
  • Grade 8.8 steel screws and 5 mm clamp hold 50 lbs without bending
  • 3 mm EVA pads on clamp and top plate protect desk and prevent slipping
  • Clamp fits desks up to 2.6 inches thick and uses only 32.5 cm²
  • 9 x 9 inch steel plate supports monitors, laptops, projectors and more

Pair of clamp-on desktop speaker stands

This pair of Avid stands clamps to a desk edge and lifts studio monitors, laptops or HiFi gear to one of four locking heights between 9 and 14 inches. The 9 by 9 inch steel top plate includes a 3 mm EVA nonslip pad and each stand is rated for 50 lbs of equipment. The C-clamp accepts desk thicknesses up to 2.6 inches and occupies only 32.5 cm² of surface area.

Thermals noise and power draw in normal use

Passive steel construction adds no fan noise, no electrical draw and no heat to the workspace. The 5 mm thick C-clamp uses grade 8.8 steel screws that resist loosening, while a 3 mm EVA pad protects the desktop from scratches. Because the stands are entirely mechanical, they impose zero thermal load on nearby components.

Behaviour under sustained load rather than

The fixed-height locking positions keep monitors stable during long mixing or streaming sessions without gradual sag. With 120 mm of wall clearance the clamp remains accessible for occasional re-tightening, and the 50 lb per-stand capacity handles heavy nearfield speakers continuously. Side-of-desk mounting is also possible when rear space is limited.

Highlights

  • Four locking heights from 9 to 14 inches position monitors at ear level
  • Grade 8.8 steel screws and 5 mm clamp hold 50 lbs without bending
  • 3 mm EVA pads on clamp and top plate protect desk and prevent slipping
  • Clamp fits desks up to 2.6 inches thick and uses only 32.5 cm²
  • 9 x 9 inch steel plate supports monitors, laptops, projectors and more

Specifications

BrandAvid
Length18 ft.
Specification14 inches, 50 pounds, 9 L x 9 W x 14 H inches
Dimension14.33in W x 12.83in H x 9.06in D

Questions about this item

How do I clamp these stands to a desk that sits against a wall?

Leave at least 120 mm or 4.7 inches of clearance behind the desk for the C-clamp to tighten, or mount the clamp on the desk’s side edge instead.

Will the EVA pads on the top plate and clamp need replacing over time?

The 3 mm EVA pads on the 9 by 9 inch top plate and the clamp base protect surfaces; they can be swapped if they wear or lose grip.

At what load or height does the stand become less stable during long sessions?

Each stand is rated for 50 lbs and locks at four heights from 9 to 14 inches; staying within that weight and using the locking pins keeps it steady.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.