Avantalk
Avantalk Ronin-S to Nucleus Nano Motor Power Cable Micro USB 12V 50cm 2 in 1 accessory
Connects a Nucleus Nano motor to a Ronin-S gimbal for 12 V power, delivering higher torque over a 50 cm 4-pin to Micro USB cable
- Powers Nucleus Nano motor directly from Ronin-S gimbal
- 12V 4-pin to Micro USB delivers higher torque than 5V USB
- 50 cm cable keeps rig tidy without excess slack
- Compatible with Tilta Ronin-S and Nucleus Nano systems
- New condition ensures reliable performance from first use
Ronin-S to Nucleus Nano Power Cable
This 2-in-1 accessory connects a Tilta Ronin-S gimbal to a Nucleus Nano motor using a 4-pin 12V port and a Micro USB connector. It is designed for camera operators who need to run the motor directly from the gimbal instead of a separate 5V USB source. The cable draws 12V power from the Ronin-S to drive the motor with higher torque. It suits solo shooters and small crews who want fewer batteries on the rig.
50 cm length with 12V delivery
At 50 cm the cable reaches from the gimbal body to the motor mount without excess slack. The 12V supply provides noticeably more torque than a standard 5V USB feed, so the motor holds heavier lenses or resists wind better. The 4-pin connector locks into the Ronin-S port while the Micro USB plugs into the Nucleus Nano. There is no voltage regulation inside the cable; it passes the gimbal output directly to the motor.
Simple integration for gimbal rigs
The cable needs a Ronin-S with an available 4-pin 12V output and a Nucleus Nano motor equipped with a Micro USB power input. It frees the operator from carrying a dedicated USB power bank for the motor, reducing weight and cable clutter on the gimbal. Builders who need longer runs or a different voltage will need a separate solution, as this cable is fixed at 50 cm and 12V only.
Highlights
- Powers Nucleus Nano motor directly from Ronin-S gimbal
- 12V 4-pin to Micro USB delivers higher torque than 5V USB
- 50 cm cable keeps rig tidy without excess slack
- Compatible with Tilta Ronin-S and Nucleus Nano systems
- New condition ensures reliable performance from first use
Specifications
No published specifications for this item yet.
Questions about this item
Will the 4-pin 12V connector on this cable fit the power port on my Ronin-S gimbal?
Yes, the cable uses a 4-pin 12V connector designed to draw power directly from the Ronin-S gimbal to run the Nucleus Nano motor.
How can I confirm the Nucleus Nano motor is receiving the correct 12V power after connecting this cable?
The motor will produce noticeably higher torque compared to 5V USB power, confirming the 12V supply from the gimbal is active.
Does the 50cm 2-in-1 cable include both the 4-pin gimbal plug and the Micro USB motor plug, or must I buy an adapter separately?
The single 50cm cable integrates both the 4-pin 12V connector for the Ronin-S and the Micro USB connector for the motor; no extra adapters are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
