Avantalk
Avantalk OM2 LC-LC Fiber Patch Cable 3m 6-Pack 2 in 1 accessory
Six-pack of 3 m OM2 duplex patch cables with LC connectors, LSZH jacket, 50/125 µm fibre and 7.5 mm bend radius for 1 Gb up to 550 m and 10 Gb up to 82 m
- Connects to SFP transceivers, media converters and NICs
- Supports 1Gb and 10Gb Ethernet over 50/125 µm multimode fiber
- 500 MHz·km bandwidth at 850/1300 nm for reliable throughput
- Reaches 550 m at 1Gb and 82 m at 10Gb
- 5 mm bend radius plus LSZH jacket for safe, dense installs
Six-Cable OM2 LC-LC Pack
This six-pack of OM2 multimode patch cables provides ready-made links for gigabit and 10 Gb Ethernet, fibre channel and LAN equipment. Each duplex jumper uses LC connectors on both ends and is suited to data-centre racks, campus networks and office patch panels. The LSZH jacket meets low-smoke safety requirements for indoor routing.
50/125 µm OM2 Multimode Core
The 50/125 µm core with 500/500 MHz·km bandwidth at 850/1300 nm is the single specification that determines compatibility with SFP transceivers, media converters and optical NICs. It supports 1 Gb links up to 550 m at 850 nm and 10 Gb links up to 82 m at 850 nm. A 7.5 mm bend radius preserves signal integrity in dense cable trays.
Three-Metre Length for Rack Connections
At three metres each, the cables comfortably span adjacent rack units, patch-panel rows and floor-to-rack runs without excess slack. They handle standard cabinet spacing and short cross-connects, but will not reach between distant racks or across large data-hall aisles. Builds needing longer spans must source extended-length jumpers separately.
Highlights
- Connects to SFP transceivers, media converters and NICs
- Supports 1Gb and 10Gb Ethernet over 50/125 µm multimode fiber
- 500 MHz·km bandwidth at 850/1300 nm for reliable throughput
- Reaches 550 m at 1Gb and 82 m at 10Gb
- 5 mm bend radius plus LSZH jacket for safe, dense installs
Specifications
No published specifications for this item yet.
Questions about this item
What does the 500 MHzkm bandwidth mean for my 1Gb or 10Gb network?
At 850 nm the cable supports 1Gb Ethernet up to 550 m and 10Gb Ethernet up to 82 m, so a 3 m patch lead will run both speeds with ample margin.
Which fibre standard does the OM2 50/125 µm duplex cable follow and what does it cap in practice?
OM2 multimode with 50/125 µm cores handles 1Gb and 10Gb Ethernet; the practical limits are the 550 m and 82 m distances at 850 nm given above.
What bend radius and jacket type do I need to plan for when routing these 3 m cables in a rack?
The cables have a 7.5 mm bend radius and an LSZH orange jacket, so they can be routed tightly in high-density racks while meeting low-smoke safety requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



