Avantalk
Avantalk 2 in 1 accessory outdoor TV mount 32-70 in
Full-motion outdoor TV mount fits 32 to 70 inch screens up to 110 lbs with tilt, swivel and weatherproof stainless steel hardware
- Weather-resistant finish passes 90-hour salt spray test
- Stainless steel screws protect against salt air corrosion
- Fits 32 to 70 inch TVs with VESA up to 400x400
- Full motion tilt plus 90-degree swivel adjusts viewing angle
- Supports up to 110 lbs with anti-theft security
Outdoor TV mount for 32 to 70 inch screens
This full-motion wall bracket fits most televisions from 32 to 70 inches and supports VESA patterns from 200x200 up to 400x400. It is built for patios, decks and balconies where a weather-proof mounting solution is required. The powder-coated finish passes a 90-hour salt-spray test and stainless-steel screws resist corrosion in salty air.
Weather resistance and movement range
The mount tilts from +10 to -20 degrees and swivels 90 degrees left or right for flexible viewing angles. Its profile extends from 2.4 to 18.6 inches from the wall, allowing the screen to be pulled out or pushed back as needed. The heavy-duty steel construction holds up to 110 lbs and includes an anti-theft design for added security outdoors.
Upgrade from fixed indoor brackets
Replaces static indoor mounts that cannot withstand rain, humidity or salt exposure. The jump is worth it when the television must live outside permanently and needs full articulation for glare reduction. Not for buyers who only need a flush indoor installation or whose screens exceed the 110 lb weight limit.
Highlights
- Weather-resistant finish passes 90-hour salt spray test
- Stainless steel screws protect against salt air corrosion
- Fits 32 to 70 inch TVs with VESA up to 400x400
- Full motion tilt plus 90-degree swivel adjusts viewing angle
- Supports up to 110 lbs with anti-theft security
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount the Avantalk bracket on a concrete patio wall and which step do people skip?
Drill pilot holes into the concrete using a masonry bit, insert the supplied anchors, then bolt the wall plate securely; the step most often missed is verifying the wall plate is perfectly level before tightening the lag bolts.
What maintenance will the powder-coated finish and stainless-steel screws need after prolonged exposure to sea air?
Rinse the bracket with fresh water every few months to remove salt deposits, inspect the powder coating for chips and touch up any bare metal, and check that the stainless-steel screws remain tight and free of corrosion.
At what point does the 110 lb weight limit become the limiting factor during daily tilt and swivel adjustments?
The 110 lb capacity is the first limit reached; exceeding it stresses the arm joints during the +10 to -20 tilt and ±90 swivel movements, so the mounted TV must stay at or below that weight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



