We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three 140 mm ARGB fans with reversed blades, black frame, magnetic daisy-chain connectors

Avantalk

Avantalk 2 in 1 accessory CT140 EX ARGB Reverse 3-Fan Pack

SKU CH-H7KB-AEH5G

Three 140 mm reverse-blade ARGB fans deliver 94.95 CFM airflow and 2.54 mm-H2O static pressure at 32.8 dBA with magnetic daisy-chain installation

  • Reversed blades show full ARGB glow from any airflow direction
  • MagForce 2.0 magnetic links snap fans together in seconds
  • 95 CFM airflow and 2.54 mm-H₂O pressure at 32.8 dBA
  • 9 addressable LEDs sync with major motherboard RGB software
  • Solid frame plus anti-vibration pads cut resonance and keep fans stable

Three-Fan Pack with Magnetic Link

The Avantalk CT140 EX ARGB Reverse pack contains three 140 mm PWM fans built for case or radiator mounting. Each unit spins at up to 1800 RPM and produces 94.95 CFM airflow with 2.54 mm-H2O static pressure at 32.8 dBA. Addressable RGB lighting uses nine LEDs per fan driven by a 5 V 3-pin header.

MagForce 2.0 Snap-Together Install

MagForce 2.0 magnetic contacts let the fans click together side-by-side so a single 4-pin PWM cable and one 3-pin ARGB cable serve the whole trio. The reversible blade design keeps the illuminated side visible whether the fan pulls or pushes air. Anti-vibration rubber pads on the frame corners dampen resonance against the chassis.

Check Headers and Clearance First

Verify the motherboard has a free 4-pin PWM header for 12 V power and a 5 V 3-pin ARGB header for lighting control. Each fan draws 0.25 A at 12 V and 0.32 A at 5 V, so confirm the headers can supply the combined current. The 25 mm thickness and 140 mm square footprint must fit the intended mount points without fouling cables or components.

Highlights

  • Reversed blades show full ARGB glow from any airflow direction
  • MagForce 2.0 magnetic links snap fans together in seconds
  • 95 CFM airflow and 2.54 mm-H₂O pressure at 32.8 dBA
  • 9 addressable LEDs sync with major motherboard RGB software
  • Solid frame plus anti-vibration pads cut resonance and keep fans stable

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the CT140 EX ARGB Reverse fans are running at the intended 1800 RPM after installation?

Check the fan speed in your motherboard BIOS or monitoring software; the PWM 12 V interface reports real-time RPM so you can verify 1800 RPM under load.

What comes in the 3-fan pack and what extra cables or controllers might I need?

The pack includes three 140 mm fans with magnetic MagForce 2.0 links and anti-vibration pads; each fan has a 4-pin PWM 12 V connector and a 3-pin 5 V ARGB header, so no separate controller is required if your board has those headers.

Which version of the CT140 EX ARGB Reverse should I choose for a 140 mm radiator or case mount?

The CL-F193-PL14SW-A model is the 140 x 140 x 25 mm size with reversed blades and MagForce 2.0, designed specifically for 140 mm radiator or case positions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.