We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with silver camera module and wide lens, attached to flat ribbon cable with gold connectors

Avantalk

Avantalk 2 in 1 Accessory Arducam Raspberry Pi Camera Module 3 Wide 120 IMX708 15cm 15-22 Pin FFC Cable

SKU CH-GA7X-N36WG

A 12-megapixel IMX708 camera with 120-degree wide-angle M12 lens and 15cm 15-22 pin FFC cable for all Raspberry Pi boards

  • HDR capture up to 3 megapixels via 12 MP IMX708 sensor
  • 120° wide-angle M12 lens expands field of view
  • Works with Raspberry Pi 5, 4B, 3B and Zero W/2 W
  • 15 cm 15-22 pin FFC cable included for direct connection
  • Manual focus M12 lens enables adjustable depth of field

Compatible Raspberry Pi Camera Module

This camera module fits every Raspberry Pi board listed by the supplier, from Pi 5 down to Pi Zero W. It ships with a 15cm 15-22 pin FFC cable so the connection is ready without extra parts. The IMX708 sensor and M12 lens are mounted on a single board for manual focus projects. Makers needing a drop-in wide-angle camera for any supported Pi can use it immediately.

CSI-2 Interface Practical Limits

The module communicates over CSI-2 serial data output with two-wire serial control, the standard Raspberry Pi camera bus. Bandwidth and frame-rate ceilings are set by the Pi model and its Libcamera or Picamera2 stack, not by the module itself. Cable length is fixed at 15cm, so the camera must sit close to the board. Builders planning longer runs or multi-camera rigs need a different interconnect solution.

120-Degree HFOV M12 Lens Decides Fit

The 120-degree horizontal field of view determines whether this module suits the scene. Wide coverage helps robotics, surveillance or immersive capture, but it cannot be narrowed without changing the lens. The fixed M12 mount means focal length is not adjustable beyond manual focus. Buyers who need a narrower perspective or interchangeable optics should choose another camera.

Highlights

  • HDR capture up to 3 megapixels via 12 MP IMX708 sensor
  • 120° wide-angle M12 lens expands field of view
  • Works with Raspberry Pi 5, 4B, 3B and Zero W/2 W
  • 15 cm 15-22 pin FFC cable included for direct connection
  • Manual focus M12 lens enables adjustable depth of field

Specifications

No published specifications for this item yet.

Questions about this item

Which cable length and pin configuration should I choose for my Raspberry Pi board?

The kit includes a 15cm 15-22 pin FFC cable that connects the camera module to any Raspberry Pi board with a 22-pin CSI connector, covering Pi 5, 4B, 3B and Zero W/2 W.

What does the 12 megapixel IMX708 sensor actually deliver on a Raspberry Pi?

The back-illuminated stacked CMOS sensor outputs up to 3 megapixels in HDR mode at a maximum resolution of 4608 by 2592 pixels on the Raspberry Pi.

How does the CSI-2 interface limit the camera's performance in practice?

The module uses CSI-2 serial data output with 2-wire serial communication, fully supported by Libcamera and Picamera2 for direct integration with the Raspberry Pi's CSI port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.