We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A small rectangular NVMe SSD circuit board with gold edge connectors and black chips

Avantalk

Avantalk 2 in 1 accessory 13 A1708 2016-2017 NVMe 2500 2000

SKU CH-G4FZ-35YZ2

NVMe SSD for MacBook Pro 13″ A1708 (2016-2017) with 2500 MB/s read and 2000 MB/s write speeds

  • Faster boot and file transfers with read speeds up to 2500MB/s
  • Quicker data writes up to 2000MB/s for responsive performance
  • Direct fit for MacBook Pro 13 A1708 2016-2017 Non-Touch Bar
  • Uses original Apple interface so no adapter is needed
  • Requires macOS 10.13 or later for the drive to be recognised

1TB NVMe SSD for MacBook Pro 13 A1708

This NVMe solid-state drive replaces the original storage in MacBook Pro 13-inch A1708 models from 2016 and 2017 with EMC 2978 or 3164. It fits Non-Touch Bar variants only and uses the Apple original interface without adapters.

macOS 10.13 minimum firmware requirement

The drive requires macOS 10.13 High Sierra, 10.14 Mojave, 10.15 Catalina or a later version installed before fitting. These releases include the EFI firmware update that allows the system to recognise the NVMe device; without the update the SSD will not be detected.

PCIe Gen3.0x4 speed ceiling

Sequential reads reach 2500MB/s and writes reach 2000MB/s over the PCIe Gen3.0x4 link, which is the maximum throughput this interface generation can deliver. Buyers needing higher bandwidth must choose a system with a newer controller.

Highlights

  • Faster boot and file transfers with read speeds up to 2500MB/s
  • Quicker data writes up to 2000MB/s for responsive performance
  • Direct fit for MacBook Pro 13 A1708 2016-2017 Non-Touch Bar
  • Uses original Apple interface so no adapter is needed
  • Requires macOS 10.13 or later for the drive to be recognised

Specifications

No published specifications for this item yet.

Questions about this item

Is this SSD the right fit for my MacBook Pro 13" A1708 from 2016 or 2017?

Yes, it matches the A1708 model with EMC 2978 or 3164, but only for Non-Touch Bar versions. Both the model number and EMC must match exactly.

What do the 2500 and 2000 MB/s figures mean for everyday use?

They are peak sequential read and write speeds over the NVMe PCIe 3.0 x4 link. Real-world boot, app launch and file copy times will be lower but still much faster than the original drive.

Does the PCIe 3.0 x4 interface limit the drive in this MacBook?

The drive uses the Mac's original NVMe PCIe 3.0 x4 connection with no adapter needed. The slot caps throughput at that generation's maximum, so the SSD runs at its rated 2500 MB/s read and 2000 MB/s write ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.