Avantalk
Avantalk 2 in 1 Accessories 1U Universal Rack Mount Rails 20.9"-32" Adjustable Depth 2 Pack
A pair of cold-rolled steel 1U rails adjusts from 20.9" to 32" depth and supports 120 lbs of non-rack-mount gear in 10" or 19" cabinets
- Supports up to 120 lbs with cold-rolled steel construction
- Adjustable depth from 20.9" to 32" fits various rack sizes
- Compatible with 10" and 19" wide racks without width limits
- Vented design improves airflow and heat dissipation for equipment
- Complete accessory kit and guides enable straightforward installation
Universal Rack Mount Rails for Non-Rack Equipment
These 1U rails adapt standard server cabinets to hold non-rack-mount servers, networking gear, AV devices and IT equipment. The bottom-suspended design leaves the underside of each unit exposed for direct airflow, aiding cooling for hardware that vents heat downward. A pair is included for immediate deployment.
Adjustable Depth 20.9 to 32 Inches
Cold-rolled steel construction supports up to 120 lbs (54 kg) per set across the full depth range. The rails telescope from 20.9 inches to 32 inches, matching shallow and deep four-post racks without modification. Vented shelf surfaces further increase ventilation efficiency for sustained operation.
Width-Agnostic Fit for 10 Inch and 19 Inch Cabinets
Unlike fixed-width cantilever shelves, these half-bracket rails impose no width restriction, fitting 10 inch, 19 inch and other cabinet standards. The electrostatic powder coat resists rust and corrosion in demanding environments. A complete accessory kit and reference instructions enable straightforward installation without specialised tools.
Highlights
- Supports up to 120 lbs with cold-rolled steel construction
- Adjustable depth from 20.9" to 32" fits various rack sizes
- Compatible with 10" and 19" wide racks without width limits
- Vented design improves airflow and heat dissipation for equipment
- Complete accessory kit and guides enable straightforward installation
Specifications
No published specifications for this item yet.
Questions about this item
Will these rails fit my existing 19-inch server cabinet?
Yes, the rails have no width restriction and work with 10-inch, 19-inch and other rack widths.
How can I confirm the rails are installed correctly and holding the rated load?
Verify the cold-rolled steel brackets sit level, all mounting screws are tight, and the equipment weight does not exceed 120 lbs (54 kg).
What hardware is included in the 2-pack and what must I supply?
The pack contains two 1U rails with a complete accessory kit and instructions; you only need to provide the rack mounting screws or cage nuts for your cabinet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
