We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black coiled cable with D-Tap plug and right-angle locking 2.5mm DC connector

Avantalk

Avantalk 12V 2.5A D-Tap to Locking 2.5mm DC Right Angle 2 in 1 accessory

SKU CH-5H6P-40Q29

Powers a Blackmagic Design ATEM Mini switcher from 13–17 VDC D-Tap sources with a regulated 12 V 2.5 A output via a 60 cm right-angle locking 2.5 mm DC cable

  • Powers ATEM Mini from D-Tap batteries with regulated 12 V 2.5 A output
  • Built-in regulator maintains steady 12 V from 13 to 17 VDC sources
  • Right-angle locking 2.5 mm DC plug prevents accidental disconnects
  • 60 cm cable length suits compact rig setups
  • Connectors rated for over 5000 mating cycles for long-term reliability

Purpose & User

This D-Tap to locking 2.5 mm DC cable powers a Blackmagic Design ATEM Mini switcher from compatible 13 to 17 VDC battery sources. It suits live-production crews and mobile streaming setups that need reliable 12 V 2.5 A delivery without an AC adapter.

Regulated Output Benefit

A built-in regulator module maintains constant 12 VDC at 2.5 A across the input range, preventing voltage drop that could interrupt the switcher during a show. The right-angle locking connector resists accidental disconnection when cables are routed tight against the unit.

Connector Build & Daily Use

Connector A is a D-Tap male; connector B is a right-angle locking 2.5 mm DC plug on a 60 cm lead. The assembly is rated for over 5000 insertions and tested for continuity and high-voltage breakdown, so it withstands frequent rigging, vibration and transport without corrosion or signal loss.

Highlights

  • Powers ATEM Mini from D-Tap batteries with regulated 12 V 2.5 A output
  • Built-in regulator maintains steady 12 V from 13 to 17 VDC sources
  • Right-angle locking 2.5 mm DC plug prevents accidental disconnects
  • 60 cm cable length suits compact rig setups
  • Connectors rated for over 5000 mating cycles for long-term reliability

Specifications

No published specifications for this item yet.

Questions about this item

Does the D-tap connector or the right-angle 2.5 mm DC plug wear out first after repeated insertions?

Both connectors share the same rated lifespan of 5000 insertion cycles, so neither is expected to fail before the other.

Will the built-in regulator module overheat when delivering 2.5 A continuously at 12 V?

The regulator is designed for constant 12 VDC output at 2.5 A from a 13 to 17 VDC source without active cooling, so it maintains its rated current under sustained use.

How much heat or noise does the cable generate during all-day operation?

The cable has no fan or moving parts, so it runs silently and produces only the minimal heat typical of a passive voltage-regulator assembly at 2.5 A load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.