AV Plus
AV Plus PT-LB3U Projector Lamp 220W UHM
Replacement projector lamp module with a 220 W UHM bulb and housing, rated for 3,000 normal or 4,000 economy hours
- TypeUHM
- Wattage220W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 220W UHM lamp delivers bright projection
- Up to 4000 hours life in economy mode
- 3000 hours normal use before replacement
- Manufactured to ISO9001 quality standards
Direct replacement for Panasonic PT-LB3U
This 220W UHM lamp module ships as a fully assembled bulb and housing, so it fits the Panasonic PT-LB3U projector without extra assembly. It is intended for owners who need a new light source that matches the original form factor and ignition requirements. Installation follows the projector’s standard lamp-change procedure.
ISO 9001 manufacturing and OEM-grade components
Each unit is built to ISO 9001 standards using bulbs from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita, then tested for beam performance, voltage, ignition, connections and run-time. The pre-fitted housing eliminates alignment hassles and protects the reflector during handling. The lamp draws 220 watts and connects through the projector’s existing lamp connector.
Rated 3,000 hours normal or 4,000 hours economy mode
In normal operation the lamp lasts approximately 3,000 hours; switching to economy mode extends that to roughly 4,000 hours. This module replaces a dimming or failed original lamp and restores full brightness for classroom, meeting-room or home-theatre use. It is not suitable for projectors that require a different wattage or lamp code.
Highlights
- Ready to install with pre-assembled bulb and housing
- 220W UHM lamp delivers bright projection
- Up to 4000 hours life in economy mode
- 3000 hours normal use before replacement
- Manufactured to ISO9001 quality standards
Specifications
| Brand | Panasonic |
|---|---|
| Type | UHM |
| Wattage | 220W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which Panasonic projectors accept the PT-LB3U lamp module?
The PT-LB3U lamp module fits Panasonic projectors that use the ET-LAB2 part number; it is a complete housing and bulb assembly ready for direct replacement.
What are the physical dimensions and weight of the PT-LB3U lamp housing?
The housing is a complete, pre-assembled module designed to match the original ET-LAB2 form factor for tool-free installation in compatible Panasonic projectors.
How do I install the PT-LB3U lamp and reset the projector timer?
Power off and cool the projector, remove the lamp cover, swap the complete module, replace the cover, then reset the lamp timer through the projector menu to track the 3000-hour normal or 4000-hour economy life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



