We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular transmitter and receiver units with HDMI, USB and Ethernet ports visible

v AV Access

AV Access 8KEX100-KVM 8K@60Hz 4:2:0 4K@120Hz 4 USB 2.0 100m HDBaseT 2.0 extender

SKU CH-T4SW-VVKX9 MPN 8KEX100-KVM

Extends 8K HDMI and four USB 2.0 ports up to 100 m over a single CAT6 cable with zero latency

  • Distance100 m / 330 ft.
  • Resolution Support8K@60Hz 4:2:0, 8K@30Hz 4:4:4
  • HDMI1Input/2Output

Model 8KEX100-KVM

Struck-through versions exist but are not stocked here.

  • 8K@60Hz 4:2:0 and 4K@120Hz visuals delivered with zero latency
  • Four USB 2.0 ports extend keyboard, mouse and peripherals up to 255 Mbps
  • Single Cat6 cable reaches 100 m or 330 ft with HDBaseT 2.0
  • EDID management, HDCP 2.3 and RS-232 pass-through integrate with pro AV systems
  • One-way PoC powers both units from one adapter for 24/7 operation

8K HDMI 2.1 KVM extender

This HDMI 2.1 extender transmits 8K video at 60 Hz 4:2:0 and 4K at 120 Hz over a single CAT6 or CAT7 cable up to 100 metres. Four USB 2.0 ports on the receiver allow remote keyboard, mouse, touchscreen or webcam control with 255 Mbps bandwidth. One-way PoC powers both units from the receiver side, reducing cabling in permanent installs.

HDBaseT 2.0 link with EDID and audio extraction

The transmitter offers one HDMI input and two HDMI outputs with EDID copy or DIP-switch selection. HDCP 2.3 compliance and an on/off switch ensure compatibility with protected content. Balanced Phoenix audio output extracts the audio stream for external amplifiers. Bi-directional RS-232 pass-through integrates with control systems in conference rooms or broadcast booths.

Check cable category and power location before

CAT6 or CAT7 is required for the full 100 m reach; CAT5e limits the link to 90 metres. The single power adapter must sit at the receiver, so plan an outlet near the display or control station. Verify that source and sink devices accept HDMI 2.1 timings such as 8K 30 Hz 4:4:4 or 4K 120 Hz 4:4:4 for the intended workflow.

Highlights

  • 8K@60Hz 4:2:0 and 4K@120Hz visuals delivered with zero latency
  • Four USB 2.0 ports extend keyboard, mouse and peripherals up to 255 Mbps
  • Single Cat6 cable reaches 100 m or 330 ft with HDBaseT 2.0
  • EDID management, HDCP 2.3 and RS-232 pass-through integrate with pro AV systems
  • One-way PoC powers both units from one adapter for 24/7 operation

Specifications

Distance100 m / 330 ft.
Resolution Support8K@60Hz 4:2:0, 8K@30Hz 4:4:4
HDMI1Input/2Output

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What HDMI standard limits the 8K@60Hz 4:2:0 and 4K@120Hz 4:4:4 output of this extender?

The unit uses HDMI 2.1 with 40Gbps bandwidth, which caps 8K at 60Hz 4:2:0 and allows 4K@120Hz 4:4:4 uncompressed over the link.

What cable category and maximum length are required to reach the 100m distance?

Use Cat6, Cat6A or Cat7 cable; the extender reaches 100m with Cat6/6A/7 and 90m with Cat5e.

How is power applied, and which side must the adapter connect to?

One-way PoC powers both units from a single adapter plugged into the receiver side only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.