AUTYUE PQ057 USB A to USB C cable 1M 10Gbps 60W 2 pack
- USB 3.2
- USB A to USB C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
AUTYUE
Two cables connect USB-A hosts to USB-C devices at 10 Gbps and deliver up to 60 W charging power
Cable Length 3.3 ft. (1.00m)
This pack contains two USB-A to USB-C cables built for USB 3.2 Gen 2 data rates up to 10 Gbps and 60 W power delivery at 20 V and 3 A. Each cable measures 3.3 ft and uses a nylon-braided jacket with aluminium connector housings. The connectors are tested for 10,000 insertion cycles and 10,000 bend cycles. The cables work with Android phones, tablets, portable SSDs and USB-A wall chargers. They are not compatible with iPhone or micro-USB devices.
The cables are passive assemblies with no active cooling or electronics, so they produce no audible noise and add negligible heat during normal use. Power draw is determined entirely by the connected charger and device, with a maximum supported output of 60 W at 20 V and 3 A. A 56 kΩ pull-up resistor is fitted to keep the charging current within safe limits. Data transfer and charging occur simultaneously without extra thermal load on the cable itself.
The package supplies two identical cables so one can stay at a desk and another travel in a bag. Reinforced strain relief and the aluminium shells reduce connector wear from frequent plugging. Backward compatibility with USB 3.1, 3.0 and 2.0 ports means the cables work with older hosts while still delivering 10 Gbps speeds on Gen 2 ports. The 60 W rating enables fast charging on phones such as the Samsung Galaxy S9 when paired with a compatible QC 3.0 charger.
| Connector Type | USB A to USB C |
|---|---|
| Color | Black |
| Connector Detail | 1 x USB A to 1 x USB C |
| Terminal Gender | Male to Male |
| Speed | Transfer speed can reach 1000MB/s |
| Specifications | Provide 60W 20V 3A Stable and safe output. |
| Features | USB C 3.2 Gen 2 to USB A Cable super speed data transfer up to 10Gbps. send or receive an HD movie in as little as 3 seconds. (USB 3.2 is backwards Compatible with USB 3.1, USB 3.0, USB 2.0.) Provide 60W 20V 3A Stable and safe output. |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Insert the blue USB-A connector fully into a USB 3.0 or 3.1 port; the cable is backward compatible with 2.0 but only reaches 10Gbps on a 3.1 Gen 2 or 3.2 Gen 2 host port.
The connectors are rated for 10000 plug cycles and 10000 bend cycles; replace the cable if the braid frays, the housing cracks or the plug feels loose.
The 56kΩ pull-up resistor limits current to 3A at 20V; if the charger or device negotiates a lower voltage the power drops below 60W.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?