AUTYUE
AUTYUE SATA III to USB 3.0 Hard Drive Adapter with 12V Power Adapter
Connects 2.5 and 3.5 SATA drives via USB 3.0 with 12V power for data recovery and backups
- Changer TypeSATA
- Connector A1 x USB 3.0
- Connector B1 x SATA III
- FeaturesThe sata to usb adapter connects to your computer or laptop
- Package Quantity1
- Package Contents1 x SATA to USB Adapter, 1 x Power Adapter
- Connect 2.5" SSD/HDD and 3.5" HDD to expand storage
- UASP support with USB 3.0 interface for up to 5Gbps theoretical speed
- Included 12V power adapter enables 3.5" desktop drive operation
- Plug-and-play compatibility with Windows, Mac OS and Linux systems
- Voltage isolation and ABS construction for safe, durable daily use
Quick SATA Access for 2.5 and 3.5 Inch Drives
This SATA III to USB 3.0 adapter connects 2.5 inch SSDs or HDDs and 3.5 inch HDDs to a computer or laptop. It helps expand drive space, upgrade systems, back up files and retrieve data from older drives. The package includes the adapter and a 12V power adapter for desktop drives. It does not support IDE parallel port interfaces.
Passive Cooling with Isolated 12V Power
The adapter draws power from the host USB port for 2.5 inch drives and uses the included DC 12V supply for 3.5 inch drives. The computer USB interface provides voltage isolation for low loss and anti-interference operation. High hardness ABS housing and a high-performance chip ensure durable, stable connections without active cooling noise.
Replaces Docking Stations for Occasional Drive
This cable replaces bulky docking stations when you only need temporary access to bare SATA drives. The jump is worth it for technicians recovering data, users cloning a single drive or anyone adding external storage without a permanent enclosure. It supports drives up to 8TB and works with Windows, Mac OS and Linux.
Highlights
- Connect 2.5" SSD/HDD and 3.5" HDD to expand storage
- UASP support with USB 3.0 interface for up to 5Gbps theoretical speed
- Included 12V power adapter enables 3.5" desktop drive operation
- Plug-and-play compatibility with Windows, Mac OS and Linux systems
- Voltage isolation and ABS construction for safe, durable daily use
Specifications
| Changer Type | SATA |
|---|---|
| Connector A | 1 x USB 3.0 |
| Connector B | 1 x SATA III |
| Features | The sata to usb adapter connects to your computer or laptop via 2.5 "SSD/HDD and 3.5" HDD, helping you easily expand drive space, upgrade systems, store, create disk images, back up files, and retrieve old hard drives to recover data. Quickly transfer content to your computer or laptop. Note: Support SATA(serial port) interface, do not support IDE(parallel port) interface. |
| Package Quantity | 1 |
| Package Contents | 1 x SATA to USB Adapter, 1 x Power Adapter |
Questions about this item
How do I install a 3.5-inch SATA drive using this adapter, and what step is often missed?
Connect the drive to the adapter, then plug in the 12V power adapter, and finally insert the USB 3.0 connector into the host. The 12V supply must be attached before the USB link or the 3.5-inch drive will not spin up.
What maintenance or replacement will this adapter need over time?
No routine maintenance is required. If the USB 3.0 cable or the 12V power adapter becomes damaged, replace only the affected accessory; the SATA bridge board itself has no serviceable parts.
What limit appears first when copying large amounts of data continuously?
Sustained throughput is capped by the USB 3.0 interface at 5 Gbps theoretical maximum; real-world speeds will be lower and may also be constrained by the connected SATA drive’s own sequential rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011557BTC
In stock
