AUTYUE
AUTYUE 20ft USB 3.0 Link Cable Gray vr accessory
A 20 ft USB 3.0 link cable with USB-A and USB-C connectors that tethers Quest 2, 3, Pro or Pico 4 headsets to a gaming PC for Steam VR at 5 Gbps
- ColorGray
- TypeCable
- PortsUSB A, USB C
- ConnectionWired
- CompatibilityCompatible with Me-ta/Oc-u-lus Quest 3/2/Pico 4 Accessories
- UsageCompatible with Quest 3/2/Pro/Pico4 Accessories, the link ca
- 20 ft cable gives room-scale freedom for PC VR
- USB 3.0 delivers 5 Gbps data throughput for Steam VR
- USB-A to USB-C connects Quest 3/2/Pro and Pico 4 to gaming PC
- Nylon-braided jacket resists wear during active sessions
- Built-in chip maintains stable link over the full length
20ft USB 3.0 VR Link Cable
This 20ft USB 3.0 cable connects Meta Quest 2, Quest 3, Quest Pro and Pico 4 headsets to a gaming PC for Steam VR gaming. The USB A to USB C wiring provides a wired alternative to wireless streaming. The six-metre length gives room-scale freedom without a short tether.
Sustained 5Gbps data transfer
The USB 3.0 interface maintains a 5Gbps signalling rate during long play sessions rather than only in short bursts. A built-in chip keeps the signal stable over the full 20ft run. The nylon-braided jacket resists wear from repeated movement and bending.
USB 3.0 and 3.1 port limits
The cable requires a host USB 3.0 or 3.1 port to reach its rated throughput; USB 2.0 ports will drop to much lower speeds. It supplies only a slow trickle charge, so the headset battery will not stay full during active use. Air Link must be disabled on the headset for the wired link to function.
Highlights
- 20 ft cable gives room-scale freedom for PC VR
- USB 3.0 delivers 5 Gbps data throughput for Steam VR
- USB-A to USB-C connects Quest 3/2/Pro and Pico 4 to gaming PC
- Nylon-braided jacket resists wear during active sessions
- Built-in chip maintains stable link over the full length
Specifications
| Color | Gray |
|---|---|
| Type | Cable |
| Ports | USB A, USB C |
| Connection | Wired |
| Compatibility | Compatible with Me-ta/Oc-u-lus Quest 3/2/Pico 4 Accessories and PC/Steam VR |
| Usage | Compatible with Quest 3/2/Pro/Pico4 Accessories, the link cable connects your VR devices to a gaming PC so that you can play all Steam VR games, providing the perfect PC VR experience. |
| Specification | USB A to USB C 20FT Link Cable |
| Dimension | 20ft. / 6M |
| Features | VR Link Cable / USB 3.0 5Gbps Transfer / 20FT Long Cable / Durable Materia |
| Package Content | 1 x VR Link Cable 20ft |
Questions about this item
Will the 20ft USB 3.0 cable get warm or draw much power during long PC VR sessions?
The cable is a passive USB 3.0 link with a built-in signal chip; it carries data at 5Gbps and supplies only a slow trickle charge, so it stays cool and adds negligible load to your PC port.
My PC has only USB 3.1 Type-A ports — will this cable work without an adapter?
Yes, the USB-A plug fits any USB 3.0 or 3.1 Type-A port, and the USB-C end connects directly to Quest 3, Quest 2, Quest Pro or Pico 4 headsets.
Can I use this 20ft link cable with my original Quest 1 while keeping my existing USB 3.0 PCIe card?
The cable is tested compatible with Quest 1, so it will work alongside your current USB 3.0 card as long as the port delivers standard USB 3.0 signalling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK VR Accessory Fit Pack SteamVR 2.0 Base Station 15 ft 4.5 m
- Fit Pack
COFIER 4K@60Hz HDMI Matrix 4x2 Switch Splitter HDCP 2.2 IR Remote Spdif vr accessory
- Controller



