We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wireless motion sensor plug kit with compact receiver and PIR sensor unit

AUTO-VOX RZ061S+RZ016W Wireless Motion Sensor Plug Kit

SKU CH-WDGS-CNQQ1

Wireless motion sensor plug kit automatically switches appliances up to 1100 W with adjustable delay and light-sensing modes

  • TypePlug-In & Wall Switch Timers
  • Voltage12
  • Amps20
  • Timing RangeMotion Sensor+plug
  • Watts110 volts * 10 amps
  • Number of ReceptaclesMotion Sensor+plug
  • No wiring or hub needed — plug straight into a socket
  • Detects movement up to 16.4–26 ft and signals up to 32.8–49 ft
  • Adjustable delay from 90 s to 60 min plus light-sensor mode
  • Handles 10 A / 1100 W for fans, lights, Christmas lights
  • 360° rotatable sensor stand runs on two AAA batteries

Wireless Motion Sensor Plug Kit

The AUTO-VOX RZ061S+RZ016W kit pairs a wireless PIR sensor with a plug-in receiver to switch appliances automatically. It suits homeowners who want hands-free control of lights, fans or seasonal decorations without wiring or an app. The system operates on 110 volts input and supports a 10 amp resistive load up to 1100 watts. No hub or Wi-Fi connection is required for operation.

Plug-In Mounting and Compact Build

Both units use a plug-in form factor that occupies a single wall socket each, leaving adjacent outlets free. The receiver accepts any standard 3-prong grounded plug and the sensor includes a universal stand with 360 degree rotational adjustment. Wireless transmission covers up to 32.8 to 49 feet while the PIR detection range reaches 16.4 to 26 feet. The sensor runs on two AAA batteries which are not included.

Check Your Setup Before Ordering

Verify that the installation location has a 110 volt outlet and that the connected device does not exceed 10 amps or 1100 watts resistive load. Ensure the sensor can be placed within 26 feet of the target area and the receiver within 49 feet of the sensor for reliable signal. Confirm you have two AAA batteries available for the sensor unit. The kit is not suited for hard-wired fixtures or loads beyond the stated ratings.

Highlights

  • No wiring or hub needed — plug straight into a socket
  • Detects movement up to 16.4–26 ft and signals up to 32.8–49 ft
  • Adjustable delay from 90 s to 60 min plus light-sensor mode
  • Handles 10 A / 1100 W for fans, lights, Christmas lights
  • 360° rotatable sensor stand runs on two AAA batteries

Specifications

TypePlug-In & Wall Switch Timers
Voltage12
Amps20
Timing RangeMotion Sensor+plug
Watts110 volts * 10 amps
Number of ReceptaclesMotion Sensor+plug
Size/Dimensions6.4008 cm x 6.9088 cm x 10.6934 cm
Color/FinishBlack
StylePlug In
Maximum Time SettingMotion Sensor+plug
Number of Poles3
Input Voltage110 volts
MountingPlug-in
BrandAUTO-VOX
Part NumberRZ061S+RZ016W 1PC

Questions about this item

What wireless range does the motion sensor provide for the receiver plug?

The sensor transmits up to 32.8 to 49 feet to the receiver plug, allowing placement across large rooms or hallways.

What are the exact dimensions of the receiver plug so I can check socket clearance?

The receiver measures 6.4008 cm wide, 6.9088 cm deep and 10.6934 cm high, occupying a single wall socket.

How do I pair the sensor with the plug during first setup, and what step is often missed?

Insert two AAA batteries into the sensor, press the pair button on the receiver, then trigger the sensor within seconds; many forget the pairing press.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.