We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal ceiling projector mount with telescopic pole 9 to 15 inches, 360 degree rotation and 90 degree tilt, ball head on base

Aurzen Ceiling Projector Mount 9-15" 360° 2.5kg

SKU CH-F83N-00REW

Adjustable ceiling mount with 360° rotation, 90° tilt and 9–15" extension holds projectors up to 2.5 kg via centred 1/4" thread

  • TypeCeiling Mount
  • CompatibilityProjectors
  • SpecificationsAurzen, Metal, 15.75 L x 5.98 W x 5.98 H inches, Ceiling Mou
  • Screen MaterialMetal
  • FeaturesCeiling Mount, Projectors, Metal
  • 360° rotation plus 90° tilt lets you aim the image from any angle
  • Telescopic pole adjusts from 9 to 15 inches for flexible ceiling height
  • Supports projectors up to 2.5 kg on ceiling and 1 kg on wall
  • Works with most brands that have a centred 1/4-inch thread
  • Complete kit includes base, pole, ball head, screws and anchors

Ceiling Mount for 2.5 kg Projectors

The Aurzen ceiling mount accepts projectors up to 2.5 kg that use a centred 1/4-inch thread. It is not compatible with the Aurzen D1 MAX model or any unit with off-centre, M6, M8 or 3.9 mm holes. Installers must fix the base to solid wood, brick or concrete only.

Telescopic Pole 9 to 15 Inches

The pole extends from 9 to 15 inches (22.86 to 38.1 cm) and carries a pre-installed ball head. The ball head provides 360° rotation and 90° vertical tilt so the image can be squared without moving the ceiling anchor. The metal construction keeps the assembly rigid at any length within the range.

Kit Includes Anchors and Hardware

One ceiling base with cover, one telescoping pole with ball head, four screws and four expansion anchors are supplied. No extra fasteners are required for a standard installation on the approved surfaces. The mount frees floor space and removes the need for a separate shelf or stand while keeping the projector aligned to the screen centre.

Highlights

  • 360° rotation plus 90° tilt lets you aim the image from any angle
  • Telescopic pole adjusts from 9 to 15 inches for flexible ceiling height
  • Supports projectors up to 2.5 kg on ceiling and 1 kg on wall
  • Works with most brands that have a centred 1/4-inch thread
  • Complete kit includes base, pole, ball head, screws and anchors

Specifications

BrandAurzen
TypeCeiling Mount
CompatibilityProjectors
SpecificationsAurzen, Metal, 15.75 L x 5.98 W x 5.98 H inches, Ceiling Mount, Projectors
Screen MaterialMetal
FeaturesCeiling Mount, Projectors, Metal

Questions about this item

How do I install the telescoping pole on a concrete ceiling and avoid the common mistake of mounting it on drywall only?

Attach the ceiling mount base to solid wood, brick, or concrete using the four supplied expansion anchors and screws; the pole then slides into the base and locks at any length between 9 and 15 inches. Drywall alone cannot hold the 2.5 kg ceiling rating.

What maintenance or replacement will the mount need over time?

Periodically check and retighten the four ceiling anchors and the ball-head locking knob; the metal pole and base have no consumable parts, so only the projector's own 1/4-inch thread may wear after many mount cycles.

What is the first limit reached when the projector is left running on the mount for long sessions?

The 2.5 kg ceiling load capacity is the hard limit; exceeding it risks the anchors pulling out, while the 360° rotation and 90° tilt mechanisms remain within their mechanical range regardless of run time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.