We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20-inch gooseneck microphone clamp with C-clamp base and mic clip

Auray

Auray GNCL-20 Gooseneck Microphone Clamp 20" Black

SKU CH-Q7X4-5ABG0

A 20 in adjustable gooseneck clamps to desks up to 2.5 in thick and holds microphones, cameras or lights up to 4 lb with included clip and thread adapter

  • TypeMicrophone Arm
  • FinishBlack
  • Length20 in
  • SpecificationGooseneck Length: 20" / 50.8 cm Gooseneck Diameter: 0.5" / 1
  • FeatureMount Microphones, Cameras, Lights 20" Adjustable Gooseneck
  • Adjustable 20" gooseneck positions microphones precisely for recording
  • C-clamp fits desks up to 2.5" thick without wasting surface space
  • Mounts vertically or horizontally using included hex wrench for versatile angles
  • Supports 4 lb load capacity with 3/8"-16 and 5/8"-27 threads
  • Includes mic clip and thread adapter for immediate compatibility

Product identity

The Auray GNCL-20 is a 20 inch gooseneck arm with a C-clamp base, designed to hold microphones, cameras or lights up to 1.8 kg on desks or podiums. It suits podcasters, streamers and presenters who need flexible positioning without a permanent mount.

Build and daily use

The .5 inch diameter gooseneck bends vertically or horizontally and locks with the supplied hex wrench. A padded clamp grips edges up to 2.5 inches thick, protecting surfaces while keeping the footprint small. The top stud uses a 3/8"-16 thread and includes a 5/8"-27 adapter, while a standard mic clip is also provided.

Compatibility check

Verify that your microphone or accessory accepts either 3/8"-16 or 5/8"-27 threads, or that the included clip fits its body. Confirm the mounting surface edge does not exceed 2.5 inches thick and that the total load stays within 1.8 kg. Buyers needing a longer reach or a heavier payload should look elsewhere.

Highlights

  • Adjustable 20" gooseneck positions microphones precisely for recording
  • C-clamp fits desks up to 2.5" thick without wasting surface space
  • Mounts vertically or horizontally using included hex wrench for versatile angles
  • Supports 4 lb load capacity with 3/8"-16 and 5/8"-27 threads
  • Includes mic clip and thread adapter for immediate compatibility

Specifications

BrandAuray
ModelAUAZGNCL20
Part NumberAUAZGNCL20
TypeMicrophone Arm
FinishBlack
Length20 in
SpecificationGooseneck Length: 20" / 50.8 cm
Gooseneck Diameter: 0.5" / 1.3 cm
Base Type: Clamp
Clamp Width: Up to 2.5" / 6.4 cm
Load Capacity: 4 lb / 1.8 kg
Mounting Thread: 3/8"-16 (5/8"-27 with Included Thread Adapter)
Weight: 2.0 lb / 0.9 kg
FeatureMount Microphones, Cameras, Lights
20" Adjustable Gooseneck
Tabletop C-Clamp with Adjustable Width
Max Clamp Width up to 2.5"
Vertical or Horizontal Gooseneck Mount
Mic Clip Included
3/8"-16 and 5/8"-27 Threads
Protective EVA Padding

Questions about this item

What thread does the 20" gooseneck use and what microphone threads does that support?

The gooseneck has a 3/8"-16 top stud and includes a 5/8"-27 adapter, so it accepts both common microphone threads.

How thick a desk edge can the C-clamp grip?

The clamp opens to 2.5" / 6.4 cm, fitting most desks, tables and podium tops.

How do I switch the gooseneck between vertical and horizontal orientation?

Loosen the hex bolt at the clamp pivot with the supplied hex wrench, rotate the gooseneck to the desired plane, then retighten the bolt securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.