We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20-inch gooseneck microphone clamp with C-clamp base and mic clip

Auray

Auray AUGNCL20 Heavy-Duty Gooseneck Microphone Clamp 20

SKU CH-MJ1R-4JDPD

A 20 inch adjustable gooseneck clamps to desks up to 2.5 inches thick and holds microphones or accessories up to 4 lb

  • TypeMicrophone Arm
  • FinishBlack
  • Length20 inch
  • SpecificationHeavy-Duty Adjustable Gooseneck
  • Mount microphones, cameras or lights securely on desks or podiums with the heavy-duty C-clamp
  • 20" adjustable gooseneck allows precise positioning for recordings or presentations
  • C-clamp fits desk edges up to 2.5" thick for stable mounting without using desk space
  • Includes mic clip and 3/8"-16 to 5/8"-27 adapter for wide microphone compatibility
  • Hex wrench enables vertical or horizontal orientation adjustments for optimal capture angles

Heavy-Duty Gooseneck Clamp

The Auray GNCL-20 is a C-clamp microphone arm that mounts on desks or podiums up to 2.5" thick. It holds microphones, cameras or lights weighing up to 4 lb. A 20" adjustable gooseneck lets you position the device precisely for recording, streaming or presentations. The clamp includes EVA padding to protect the mounting surface from scratches.

Silent Passive Operation

The stand has no motor, fan or active electronics, so it adds no noise or power draw to the environment. Its all-metal construction handles the rated load without vibration when the hex-wrench locks are tightened. Because it draws no power, it does not compete for outlets or USB ports on a busy desk. The design is therefore suitable for quiet studios, conference rooms or home offices.

Compact Desk Integration

The C-clamp frees desktop space by gripping the edge instead of using a wide base. A 3/8"-16 top stud and the supplied 5/8"-27 adapter accept common microphone clips and accessory threads. The included mic clip and hex wrench mean the arm is ready to use without extra purchases. Builders who need a second arm for a dual-mic setup or who require a longer reach than 20" will need an additional solution.

Highlights

  • Mount microphones, cameras or lights securely on desks or podiums with the heavy-duty C-clamp
  • 20" adjustable gooseneck allows precise positioning for recordings or presentations
  • C-clamp fits desk edges up to 2.5" thick for stable mounting without using desk space
  • Includes mic clip and 3/8"-16 to 5/8"-27 adapter for wide microphone compatibility
  • Hex wrench enables vertical or horizontal orientation adjustments for optimal capture angles

Specifications

BrandAuray
Part NumberAUGNCL20
TypeMicrophone Arm
FinishBlack
Length20 inch
SpecificationHeavy-Duty Adjustable Gooseneck

Questions about this item

How do I install the 20" gooseneck onto the C-clamp and which step is most often missed?

Slide the gooseneck into the clamp's top stud, then tighten the set screw with the included hex wrench; the step people forget is securing that set screw before adding any microphone or accessory.

What maintenance or replacement will the clamp need over time?

The hex wrench and 3/8"-16 to 5/8"-27 adapter are the only removable parts; if either is lost, replace it with the same thread sizes to keep the 20" gooseneck compatible with standard mic clips.

At what load does the 20" gooseneck start to sag during a long session?

The arm is rated for a maximum of 4 lb; exceeding that weight causes the gooseneck to droop first, so keep the combined microphone and accessory weight at or below the rated limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.