We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular dash remote with matte black finish, rotary knob, and 20 foot cable

Audiocontrol

Audiocontrol ACR-1 Dash Remote car amplifier

SKU CH-NBT3-B72WF

Dash remote adds level control for compatible AudioControl processors and amplifiers, includes a 20-foot cable and removable mounting enclosure

  • TypeAmplifier & Processor Remotes
  • Adds remote level control for AudioControl processors and amplifiers
  • Replacement remote for The Epicenter processor with direct compatibility
  • Includes 20 foot cable for flexible dash placement
  • Removable mounting enclosure enables custom dashboard installation
  • Compact 1.75W x 2.5D x 1.0H design weighs 2.3oz

Dash Remote for AudioControl Units

The AudioControl ACR-1 provides a dash-mounted level control for compatible processors and amplifiers. It replaces the original remote for The Epicenter and supports current models including the LC2i, LC6i, LC7i, Overdrive Plus, Matrix Plus, 6XS, LC-4.800 and LC-6.1200. Legacy units such as the LC6, LC8 and original Epicenter are also supported, though bypass is not available on the earliest Epicenter.

Simple Install With Custom Mounting

A 20 foot cable is included for routing from the dash to the processor location. The removable mounting enclosure measures 1.75 wide by 2.5 deep by 1.0 high and allows a clean custom installation in the dashboard. The unit weighs 2.3 ounces or 65.2 grams, so it adds negligible mass to the dash panel. No additional wiring or configuration is required beyond plugging into the remote port.

Steady Operation Under Daily Use

The remote is a passive controller with no internal amplification, so sustained use does not generate heat or signal drift. Level adjustments remain consistent over long drives because the device simply sends a control voltage to the connected processor. There are no active circuits to fatigue, making reliability dependent only on the cable and connector integrity over time.

Highlights

  • Adds remote level control for AudioControl processors and amplifiers
  • Replacement remote for The Epicenter processor with direct compatibility
  • Includes 20 foot cable for flexible dash placement
  • Removable mounting enclosure enables custom dashboard installation
  • Compact 1.75W x 2.5D x 1.0H design weighs 2.3oz

Specifications

TypeAmplifier & Processor Remotes

Questions about this item

How do I verify the ACR-1 dash remote is controlling my amplifier or processor correctly after installation?

Adjust the rotary knob and confirm the connected AudioControl unit's output level changes accordingly; the 20 foot cable length allows placement at the dash while the amplifier remains in the boot.

What comes in the box with the ACR-1 and what extra items are required for a custom dash installation?

The package includes the ACR-1 remote and a 20 foot phone cable; the removable mounting enclosure is already supplied for custom dash installations, so no separate bracket is needed.

Which AudioControl processors or amplifiers are compatible with the ACR-1 remote level control?

The ACR-1 works with LC2i, LC6i, LC7i, Overdrive Plus, Matrix Plus, 6XS, The Epicenter, LC-4.800, LC-6.1200 and legacy LC6, LC8 and original Epicenter models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.