Audio2000S
Audio2000S AWM6074UL UHF Dual-Channel Wireless Handheld/Lavalier Microphone System
UHF dual-channel wireless microphone system with handheld and lavalier options, 571–598 MHz range and 300 ft outdoor reach
- Dual-channel UHF operation across 571–598 MHz carrier range
- Stable RF link with ±0.005 % frequency stability
- Clear audio capture from 80–15,000 Hz response
- Clean signal with >80 dB S/N ratio and
- Reliable reach up to 300 ft outdoors and 150 ft indoors
Dual-Channel UHF Wireless System
The Audio2000S AWM6074UL provides two independent UHF channels for simultaneous handheld or lavalier microphone use. It operates across a 571 to 598 MHz carrier range with +/- 0.005% frequency stability. The system suits presenters, educators, or streamers who need cable-free movement for two speakers at once.
Sustained RF Reliability
A silence circuit suppresses static when transmitters are idle or beyond range, while an auto-mute circuit prevents popping during power switching. The receiver maintains >80 dB signal-to-noise ratio and <1% total harmonic distortion across the 80 to 15,000 Hz audio band. Image and spurious rejection reaches 50 dB minimum for clean reception during extended sessions.
Professional Build and Connectivity
The chassis is engineered for dependable UHF performance with strict component selection and high-quality circuit design. Service area covers 300 feet (91.4m) outdoors and 150 feet (45.72m) indoors, giving reliable coverage for stages, classrooms, or studios. Standard microphone inputs allow quick integration with mixers, cameras, or audio interfaces.
Highlights
- Dual-channel UHF operation across 571–598 MHz carrier range
- Stable RF link with ±0.005 % frequency stability
- Clear audio capture from 80–15,000 Hz response
- Clean signal with >80 dB S/N ratio and
- Reliable reach up to 300 ft outdoors and 150 ft indoors
Specifications
No published specifications for this item yet.
Questions about this item
Does the UHF 571-598 MHz system generate noticeable heat or draw much power during all-day use?
The wireless transmitters run on standard batteries and stay cool; the receiver uses a low-voltage external supply, so heat and power draw remain minimal during continuous operation.
What connectors or inputs must my mixer or recorder have to use the AWM6074UL receiver?
The receiver provides balanced XLR and unbalanced 1/4" outputs, so your mixer, interface or recorder needs matching XLR or 1/4" line-level inputs for each channel.
Will the 80-15,000 Hz response and >80 dB signal-to-noise match my older analogue mixer without extra gain staging?
Yes — the wide frequency response and high S/N ratio deliver line-level output compatible with legacy analogue desks, requiring no special gain adjustments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



