Audio-Technica ATR1100X Unidirectional Dynamic Microphone 600 ohm 80 dB 6.35 mm Jack
Unidirectional dynamic microphone with 600 ohm impedance and 80 dB signal-to-noise ratio, includes desk stand and 6.35 mm jack adapter
- ColorBlack
- Connector6.35 mm Jack
- Microphone Impedance600 ohm
- Microphone Signal to Noise Ratio(SNR)80 decibels
- FeaturesStand
- Clear vocal capture with unidirectional pattern
- Low noise floor at 80 decibels signal-to-noise ratio
- Stable 600 ohm impedance for consistent signal
- Versatile 6.35 mm jack connects to mixers and interfaces
- On/off switch and desk stand for convenient control
All-purpose dynamic microphone
The Audio-Technica ATR1100X is a unidirectional dynamic microphone built for clear vocal and instrument capture. Its 600 ohm impedance and 80 dB signal-to-noise ratio suit karaoke, computer recording and PA use. A focused cardioid pattern reduces feedback in live or home settings. The package includes a desk stand and a 6.35 mm adapter for flexible connection.
Check your input and cable needs
Verify that your recorder, interface or sound card accepts a 6.35 mm jack or the supplied 3.5 mm mini-plug. The permanently attached three-metre cable cannot be swapped, so confirm the length reaches your position. An on/off switch sits on the body for quick muting. No phantom power is required for this dynamic capsule.
Fits desktop and portable setups
The microphone plugs directly into mixer channels, audio interfaces or PC line inputs using the included 6.35 mm adapter. Its desk stand keeps the capsule stable on a table without a boom arm. The unidirectional pickup isolates the source, freeing the mix from room bleed. Use it for streaming, podcasting or rehearsal with minimal extra gear.
Highlights
- Clear vocal capture with unidirectional pattern
- Low noise floor at 80 decibels signal-to-noise ratio
- Stable 600 ohm impedance for consistent signal
- Versatile 6.35 mm jack connects to mixers and interfaces
- On/off switch and desk stand for convenient control
Specifications
| Brand | Audio-Technica |
|---|---|
| Model | ATR1100X |
| Part Number | ATR Series |
| Color | Black |
| Connector | 6.35 mm Jack |
| Microphone Impedance | 600 ohm |
| Microphone Signal to Noise Ratio(SNR) | 80 decibels |
| Features | Stand |
Questions about this item
Does the ATR1100X come with everything needed to plug into a 6.35 mm jack, or must I buy an adapter separately?
The box includes a permanently attached 3 m cable ending in a 3.5 mm mini-plug plus a 6.35 mm adapter, so you can connect directly to a 6.35 mm input without extra purchases.
The specs list 600 ohm impedance and 80 dB signal-to-noise — which matters more for a home karaoke setup?
Both are fixed characteristics of this model; the 600 ohm impedance matches typical karaoke and PA inputs, while the 80 dB signal-to-noise ratio keeps background hiss low during quiet vocal passages.
How does the 80 dB signal-to-noise ratio actually sound when the mic is on a desk stand in a typical room?
An 80 dB signal-to-noise ratio means the microphone's self-noise is well below normal room ambience, so vocals come through cleanly without audible hiss when using the included desk stand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



