We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black belt-drive turntable with J-shaped tonearm and elliptical stylus

Audio-Technica

Audio-Technica AT-LP7 Turntable Black

SKU CH-NC73-VPBFK

Fully manual belt-drive turntable with speed-sensor motor, VM520EB cartridge and adjustable J-shaped tonearm

  • TypeTurntables & Cartridges
  • Accessory TypeBelt Drive Turntables
  • InputsRCA
  • Turntable Speed33-1/3 RPM, 45 RPM
  • FeatureFully manual, belt-drive operation with two speeds: 33-1/3 a
  • Dimension17.72"W x 13.86"D x 6.18"H
  • Fully manual belt-drive at 33 and 45 RPM
  • Speed-sensor motor keeps platter rotation accurate
  • VM520EB dual moving magnet cartridge with elliptical stylus
  • 40 mm MDF chassis damps vibration and feedback
  • J-shaped tonearm with adjustable height and anti-skate

Fully Manual Belt-Drive Operation

The Audio-Technica AT-LP7 is a fully manual belt-drive turntable designed for listeners who want hands-on control of vinyl playback. It operates at two speeds, 33-1/3 RPM and 45 RPM, and includes a VM520EB Dual Moving Magnet cartridge mounted on a 10 g AT-HS10 headshell. A speed-sensor system in the motor maintains accurate platter rotation for consistent pitch stability. The 40 mm MDF chassis provides anti-vibration damping to limit low-frequency feedback.

Upgrade Path via VM Stylus Line

The supplied 0.3 x 0.7 mil elliptical bonded stylus can be swapped for any of the six other styli available in the VM line. This allows a listener to improve tracking and frequency response without replacing the entire cartridge. The J-shaped tone arm includes adjustable counterweight and anti-skate controls, plus a height range of 0 mm to 6 mm, so the arm can be calibrated precisely for the chosen stylus profile. The metallic gimbal suspension and precision bearings reduce tracking errors across the record surface.

Integration Into a Home Audio System

The turntable outputs a phono-level signal through RCA connectors, requiring a phono preamplifier or an amplifier with a dedicated phono stage. Its 40 mm MDF construction and anti-resonance platter suppress vibration, letting the cartridge resolve detail without colouration from the chassis. The adjustable tone arm height accommodates a wide variety of cartridges beyond the fitted VM520EB, giving the builder flexibility to match the turntable to different system voicings.

Highlights

  • Fully manual belt-drive at 33 and 45 RPM
  • Speed-sensor motor keeps platter rotation accurate
  • VM520EB dual moving magnet cartridge with elliptical stylus
  • 40 mm MDF chassis damps vibration and feedback
  • J-shaped tonearm with adjustable height and anti-skate

Specifications

BrandAudio-Technica
ModelAT-LP7
TypeTurntables & Cartridges
Accessory TypeBelt Drive Turntables
InputsRCA
Turntable Speed33-1/3 RPM, 45 RPM
FeatureFully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM, Motor features a speed-sensor system to maintain accurate platter rotation speed, VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus, J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking, Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges, 20 mm-thick, anti-resonance, polyoxymethylene platter, 40
Dimension17.72"W x 13.86"D x 6.18"H
Weight18.3

Questions about this item

What are the exact dimensions of the AT-LP7 so I can check if it fits my shelf?

The turntable measures 17.72 inches wide, 13.86 inches deep and 6.18 inches high, weighing 18.3 pounds, so allow a few extra inches around the edges for the tone arm swing and cable connections.

What is the correct way to fit the belt on the AT-LP7 and what step do people often miss?

Loop the belt around the motor pulley and the platter's inner rim after placing the platter on the spindle, then rotate the platter by hand several times to confirm the belt sits flat and centred — skipping this check causes speed drift.

Which stylus replacements work with the supplied VM520EB cartridge on the AT-LP7?

The 0.3 x 0.7 mil elliptical bonded stylus can be swapped for any of the six other styli in the VM line without replacing the whole cartridge, letting you upgrade tracking performance later.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.