AUBEAMTO
AUBEAMTO 4K@60Hz HDMI 2.0b Audio Extractor HDMI to HDMI Optical 3.5mm ARC
Extracts optical and 3.5 mm audio from a 4K 60 Hz HDMI 2.0b signal with ARC support
- TypeHDMI to HDMI + Optical Toslink SPDIF + 3.5mm AUX Stereo Audi
- Package Contents1 X HDMI Audio Extractor 1 x 5V/1A Power Adapter 1 X User Ma
- Extract audio via optical or 3.5 mm while passing 4K 60 Hz video
- Supports 5.1 channel Dolby and DTS through Toslink output
- Three EDID modes match source to soundbar or amplifier
- HDMI 2.0b bandwidth handles 18 Gbps for 4K HDR signals
- Works with consoles, PCs and streamers using standard HDMI cables
AUBEAMTO 4K HDMI Audio Extractor
This AUBEAMTO unit extracts audio from an HDMI source and delivers it through three simultaneous paths. One HDMI input passes video unchanged to an HDMI output while also sending digital audio to an optical Toslink port and analogue stereo to a 3.5 mm jack. It suits home-cinema owners who need to feed a soundbar or AV receiver that lacks HDMI inputs.
Check HDMI version and audio format support
Verify that your source device can output 4K at 60 Hz over HDMI 2.0b and that your display accepts the same signal through the extractor’s pass-through port. The optical output carries 2.0 CH PCM or 5.1 CH bitstream formats including Dolby Digital and DTS, but the extractor does not decode them; set the source to PCM or LPCM if your amplifier cannot handle bitstream. A 5 V 1 A power adapter is included and must be connected for operation.
Stable 18 Gbps throughput under load
The extractor maintains the full 18 Gbps bandwidth during extended viewing sessions, supporting deep-colour 30-bit and 36-bit video without dropouts. Input cables up to 10 metres using AWG26 standard HDMI cable are supported, and the 600 MHz pixel clock ensures consistent 4K 60 Hz 4:4:4 transmission. Audio separation remains synchronised with video over long periods, avoiding the lip-sync drift that can appear on lesser splitters.
Highlights
- Extract audio via optical or 3.5 mm while passing 4K 60 Hz video
- Supports 5.1 channel Dolby and DTS through Toslink output
- Three EDID modes match source to soundbar or amplifier
- HDMI 2.0b bandwidth handles 18 Gbps for 4K HDR signals
- Works with consoles, PCs and streamers using standard HDMI cables
Specifications
| Type | HDMI to HDMI + Optical Toslink SPDIF + 3.5mm AUX Stereo Audio Out |
|---|---|
| Package Contents | 1 X HDMI Audio Extractor 1 x 5V/1A Power Adapter 1 X User Manual |
Questions about this item
What cables and accessories come with the AUBEAMTO extractor and is a separate HDMI cable needed?
The box contains the extractor, a 5V/1A power adapter and a user manual. A high-speed HDMI cable is also included so no separate HDMI cable purchase is required.
Which audio mode should I select on the EDID switch for a stereo soundbar versus a 5.1 surround receiver?
Choose 2.0CH for the 3.5mm stereo output or a stereo soundbar; choose 5.1CH for the optical Toslink output when connecting a surround receiver that supports Dolby Digital or DTS bitstreams.
Will the extractor pass a 4K 60Hz HDR signal from a PS5 to my TV while sending audio to my receiver?
Yes. The HDMI 2.0b path supports 4K at 60Hz with 24-bit or deep-colour 30/36-bit video and 18Gbps bandwidth, so the video passes through untouched while audio is simultaneously extracted to optical or 3.5mm.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114986BTC
In stock
