ATPAZDB
ATPAZDB M133NWF4R7 laptop screen 13.3 1920x1080 IPS 60Hz 30pin
A 13.3 inch IPS panel with 1920x1080 resolution, 60Hz refresh, 300 cd/m² brightness and a 30-pin connector
- Compatible ModelsM133NWF4R7
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD 1920x1080 resolution for sharp detail
- IPS panel delivers wide viewing angles
- 60 Hz refresh rate for smooth motion
- 300 cd/m² brightness ensures clear visibility
- 30-pin connector matches original laptop interface
Replacement panel for 13.3-inch laptops
This brand-new IPS display replaces the original M133NWF4R7 screen in compatible notebooks. It delivers a Full HD resolution of 1920x1080 with a 60Hz refresh rate and a 30-pin video connector. The matte finish reduces glare for comfortable viewing in varied lighting conditions.
Compatibility and limitations
The panel fits devices that specify the exact M133NWF4R7 part number and a 30-pin interface. It is not suitable for laptops requiring a different connector pin count, a higher refresh rate, or a touch-sensitive layer. Buyers needing 4K resolution, 120Hz gaming performance, or touchscreen functionality should look at other screens.
Deciding specification: 30-pin connector
The 30-pin video signal connector is the single detail that determines whether this screen will install and function. Verify the original panel uses the same 30-pin layout before ordering; a mismatch prevents the display from working regardless of size or resolution.
Highlights
- Full HD 1920x1080 resolution for sharp detail
- IPS panel delivers wide viewing angles
- 60 Hz refresh rate for smooth motion
- 300 cd/m² brightness ensures clear visibility
- 30-pin connector matches original laptop interface
Specifications
| Part Number | M133NWF4R7 |
|---|---|
| Compatible Models | M133NWF4R7 |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does my laptop need a 30-pin video connector to use this M133NWF4R7 screen?
Yes, the panel uses a 30-pin video signal connector, so the host laptop must provide a matching 30-pin interface for the display to work.
Will this 13.3-inch 1920x1080 60Hz IPS panel work if my original screen had a different refresh rate or resolution?
The replacement is fixed at 1920x1080 resolution and 60Hz refresh; the laptop’s graphics must drive that exact mode, otherwise the panel will not display correctly.
How can I confirm the screen is performing to its 300 cd/m² brightness and 1200:1 contrast specifications after installation?
Display a full-white test pattern at maximum backlight setting and measure luminance with a calibrator; it should read near 300 cd/m², and a checkerboard pattern should yield a contrast ratio close to 1200:1.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



