ATPAZDB
ATPAZDB LQ173D1JW33 17.3 inch UHD 4K 3840x2160 IPS laptop screen
A 17.3 inch IPS laptop display with UHD 4K 3840x2160 resolution, 350 cd/m² brightness and a 40-pin connector
- Compatible ModelsLQ173D1JW33
- Screen Size17.3 inch
- Screen ResolutionUHD 4K 3840x2160
- Sharp 4K detail on a 17.3 inch IPS panel
- Wide viewing angles backed by IPS technology
- Bright 350 cd/m² output for clear visibility
- High 1000:1 contrast ratio for deep blacks
- Standard 40-pin video connector ensures direct fit
Replacement panel details
This 17.3 inch IPS panel uses the LQ173D1JW33 part number and delivers a UHD 4K resolution of 3840x2160. It operates at a 60Hz refresh rate with a 40-pin video signal connector. The matte, non-touch surface is rated at 350 cd/m² brightness and a 1000:1 contrast ratio.
Who should buy this
The screen suits technicians or owners replacing a damaged LQ173D1JW33 panel in a compatible 17.3 inch notebook. It will not suit buyers who need a touchscreen layer, a higher refresh rate for gaming, or a different connector pin count.
Critical compatibility factor
The 40-pin video signal connector is the single specification that determines whether this panel will work in the target laptop. Verify the original screen uses the identical 40-pin interface before ordering.
Highlights
- Sharp 4K detail on a 17.3 inch IPS panel
- Wide viewing angles backed by IPS technology
- Bright 350 cd/m² output for clear visibility
- High 1000:1 contrast ratio for deep blacks
- Standard 40-pin video connector ensures direct fit
Specifications
| Part Number | LQ173D1JW33 |
|---|---|
| Compatible Models | LQ173D1JW33 |
| Screen Size | 17.3 inch |
| Screen Resolution | UHD 4K 3840x2160 |
Questions about this item
My laptop currently uses a 40-pin eDP cable — will this LQ173D1JW33 panel plug straight in?
Yes, the panel uses a 40-pin video signal connector, so it matches a 40-pin eDP cable.
I am keeping my existing 60 Hz display controller — can it drive this 3840×2160 IPS screen at its native refresh rate?
The screen runs at 60 Hz, so a 60 Hz controller will drive the 3840×2160 resolution without timing changes.
After fitting the panel, how can I confirm it is delivering the specified 350 cd/m² brightness and 1000:1 contrast?
Display a full-white test pattern and measure centre luminance with a calibrator; it should read close to 350 cd/m², and a black/white checkerboard should approach 1000:1 contrast.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



