ATPAZDB
ATPAZDB LP173WD1 (TP)(E2) laptop screen HD+ 1600x900 17.3 30 Pins
A 17.3-inch HD+ laptop replacement panel with 1600×900 resolution, 30-pin connector, 60 Hz refresh rate, 220 cd/m² brightness and 400:1 contrast
- Compatible ModelsLP173WD1(TP)(E2)
- Screen Size17.3 inch
- Screen ResolutionHD+ 1600x900
- HD+ 1600x900 resolution for crisp visuals
- 3 inch display matches original chassis size
- 30 pin video connector ensures direct fit
- 220 cd/m² brightness suits indoor work
- 60 Hz refresh handles everyday tasks
Direct-fit 17.3-inch HD+ panel
This 17.3-inch replacement screen matches part number LP173WD1 (TP)(E2) exactly. It is built for technicians and owners repairing a compatible notebook without touch input. The 30-pin video connector aligns with the original cable routing. No adapter or harness modification is required.
1600×900 resolution with 220 cd/m² brightness
The HD+ panel delivers 1600 by 900 pixels at a 60 Hz refresh rate. Typical brightness reaches 220 cd/m² and contrast sits at 400:1. Indoor office work and web browsing are comfortable, but outdoor glare or colour-critical editing will find the luminance and contrast limiting.
30-pin non-touch video connector
The single specification that decides fit is the 30-pin video signal connector on a non-touch panel. If the original screen uses a different pin count, a touch digitiser, or a dissimilar bracket layout, this part will not install. Verify the connector and touch status before ordering.
Highlights
- HD+ 1600x900 resolution for crisp visuals
- 3 inch display matches original chassis size
- 30 pin video connector ensures direct fit
- 220 cd/m² brightness suits indoor work
- 60 Hz refresh handles everyday tasks
Specifications
| Part Number | LP173WD1(TP)(E2) |
|---|---|
| Compatible Models | LP173WD1(TP)(E2) |
| Screen Size | 17.3 inch |
| Screen Resolution | HD+ 1600x900 |
Questions about this item
Will the 30-pin connector on this LP173WD1 screen match my laptop's existing video cable?
Yes, the panel uses a 30-pin video signal connector that matches the LP173WD1 (TP)(E2) part number, so it plugs directly into the original cable.
How can I confirm the 1600x900 panel is running at its native 60 Hz refresh rate after installation?
Open your OS display settings and verify the resolution shows 1600 x 900 at 60 Hz; the screen will also report its model as LP173WD1(TP)(E2) in the hardware list.
Does the box include any mounting brackets or adhesives, or just the bare 17.3-inch panel?
Only the bare LP173WD1(TP)(E2) panel is supplied; brackets, bezel clips or adhesive strips must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



