We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A new 17.3 inch laptop replacement screen with a matte finish and 40-pin connector

ATPAZDB

ATPAZDB LP173WD1 laptop screen HD+ 1600x900 17.3" 40-pin

SKU CH-X1V4-F8AV9 MPN LP173WD1

A 17.3 inch HD+ 1600x900 laptop replacement screen with 40-pin connector, 220 cd/m² brightness and 600:1 contrast ratio

  • Compatible ModelsLP173WD1(TL)(A1)
  • Screen Size17.3 inch
  • Screen ResolutionHD+ 1600x900
  • HD+ 1600×900 resolution gives sharp detail for daily work
  • 3 inch panel restores original laptop display size
  • 40-pin connector matches LP173WD1(TL)(A1) pin-out exactly
  • 220 cd/m² brightness keeps text readable in typical indoor light
  • 600:1 contrast ratio delivers clear separation between dark and light areas

Screen size and resolution

This 17.3-inch laptop replacement panel delivers an HD+ resolution of 1600x900 pixels. It uses a standard 40-pin video signal connector for installation. The screen is a non-touch display designed as a direct fit for the LP173WD1(TL)(A1) part number. Buyers should verify their original screen matches this exact model before ordering.

Compatibility and use case

The panel suits users replacing a damaged LP173WD1(TL)(A1) screen in a compatible 17.3-inch notebook. It is not suitable for laptops requiring a different connector pin count, a touch-enabled digitiser, or a higher native resolution such as Full HD. Buyers with models using a 30-pin or 50-pin interface should look for a different part.

Key specification: 40-pin connector

The single specification that determines fit is the 40-pin video signal connector combined with the LP173WD1(TL)(A1) part number. Even if the size and resolution appear identical, a different pin layout will prevent the screen from working. Confirm the original screen carries the exact LP173WD1(TL)(A1) marking on its label.

Highlights

  • HD+ 1600×900 resolution gives sharp detail for daily work
  • 3 inch panel restores original laptop display size
  • 40-pin connector matches LP173WD1(TL)(A1) pin-out exactly
  • 220 cd/m² brightness keeps text readable in typical indoor light
  • 600:1 contrast ratio delivers clear separation between dark and light areas

Specifications

Part NumberLP173WD1(TL)(A1)
Compatible ModelsLP173WD1(TL)(A1)
Screen Size17.3 inch
Screen ResolutionHD+ 1600x900

Questions about this item

How do I install the 40-pin connector on the LP173WD1 screen without damaging the pins?

Align the 40-pin connector carefully with the motherboard socket, press straight down until it clicks, and avoid bending any pins by forcing it at an angle.

Will the backlight on this 17.3-inch panel need replacement after a few years of daily use?

The 220 cd/m² LED backlight is rated for typical notebook lifespan; dimming or uneven lighting after extended use indicates the panel should be replaced.

At what point does the 60 Hz refresh rate become a bottleneck during long gaming or video sessions?

The 60 Hz refresh rate caps motion smoothness at 60 frames per second, so fast-panning content or competitive gaming will show motion blur before any other limit appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.