ATPAZDB
ATPAZDB LP133WF7 laptop screen 13.3 inch 1920x1080 IPS 30 pins
13.3 inch Full HD IPS replacement panel with 30-pin connector, 300 cd/m² brightness and 60 Hz refresh rate
- Compatible ModelsLP133WF7(SP)(B2)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD clarity with 1920x1080 resolution
- Wide IPS viewing angles on a 13.3 inch panel
- Smooth 60 Hz refresh for everyday tasks
- Bright 300 cd/m² output for clear visuals
- Direct 30-pin fit for LP133WF7 (SP)(B2) models
Drop-in 13.3 inch FHD panel
The ATPAZDB LP133WF7 is a new 13.3 inch IPS replacement screen built to the LP133WF7 (SP)(B2) part number. It delivers 1920x1080 Full HD resolution on a non-touch panel with a 30-pin video connector. The display suits repair technicians and owners restoring a compatible laptop to its original visual specification.
Passive thermal profile
The panel operates without active cooling and adds no audible noise to the system. Typical brightness reaches 300 cd/m² with an 800:1 contrast ratio at a 60 Hz refresh rate. Power draw is limited to the display circuitry itself and requires no separate thermal management in the chassis.
Direct 30-pin swap
Installation connects the existing 30-pin cable to the matching connector on the panel. No adapter, inverter or firmware change is needed when the laptop already uses the LP133WF7 (SP)(B2) specification. The slim IPS module frees internal space compared to older CCFL assemblies and restores full viewing angles without touch-layer overhead.
Highlights
- Full HD clarity with 1920x1080 resolution
- Wide IPS viewing angles on a 13.3 inch panel
- Smooth 60 Hz refresh for everyday tasks
- Bright 300 cd/m² output for clear visuals
- Direct 30-pin fit for LP133WF7 (SP)(B2) models
Specifications
| Part Number | LP133WF7(SP)(B2) |
|---|---|
| Compatible Models | LP133WF7(SP)(B2) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I connect the 30-pin video connector when installing the LP133WF7 screen?
Align the 30-pin ribbon cable with the motherboard socket, insert it straight until it seats, then lock the retaining flap; the step most people miss is flipping the flap back down to secure the connection.
What component typically needs replacement first on the LP133WF7 panel after extended use?
The LED backlight is the first part to degrade; brightness drops from the rated 300 cd/m² over time, and the panel cannot be relamped, so the whole screen is replaced.
At what refresh rate does the LP133WF7 hit its motion-clarity limit during sustained gaming or video?
The panel is specified at 60 Hz, so motion resolution tops out there; faster frame rates from the GPU will not appear smoother on this display.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



