ATPAZDB
ATPAZDB LP133WF4 13.3" FHD 1920x1080 IPS 30-pin laptop screen
A 13.3 inch Full HD IPS replacement panel with 1920x1080 resolution, 300 cd/m² brightness, 700:1 contrast and a 30-pin connector
- Compatible ModelsLP133WF4(SP)(F1)
- Screen Size13.3 inch
- Screen ResolutionFull HD (FHD) 1920x1080
- Full HD 1920x1080 resolution delivers sharp detail
- IPS panel provides wide viewing angles
- 300 cd/m² brightness ensures clear visibility
- 700:1 contrast ratio produces deep blacks
- 30-pin connector matches LP133WF4 (SP)(F1) models
Direct-fit 13.3" Full HD IPS panel
This 13.3 inch replacement screen matches part number LP133WF4(SP)(F1) and delivers a 1920x1080 IPS image at 60Hz. It is intended for owners of laptops that originally shipped with this exact panel and need a new display without touch functionality.
30-pin connector simplifies the swap
Installation requires disconnecting the old panel and attaching the 30-pin video signal connector; the pin layout matches the original specification so no adapter is needed. The most common issue is ordering the wrong variant — verify the part number on the rear label before purchase because similar models use different pin counts or brackets.
300 cd/m² brightness and 700:1 contrast hold steady
Under continuous use the IPS panel maintains its rated 300 cd/m² luminance and 700:1 contrast ratio without the dimming or colour shift sometimes seen in short-burst tests. The 60Hz refresh rate remains stable during long sessions, making the display suitable for extended office work or media playback.
Highlights
- Full HD 1920x1080 resolution delivers sharp detail
- IPS panel provides wide viewing angles
- 300 cd/m² brightness ensures clear visibility
- 700:1 contrast ratio produces deep blacks
- 30-pin connector matches LP133WF4 (SP)(F1) models
Specifications
| Part Number | LP133WF4(SP)(F1) |
|---|---|
| Compatible Models | LP133WF4(SP)(F1) |
| Screen Size | 13.3 inch |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How can I confirm the screen is working correctly after installing the LP133WF4 (SP)(F1) panel?
Power on the laptop and verify the BIOS splash screen appears at the native 1920x1080 resolution. Check that colours look natural across wide viewing angles, consistent with the IPS panel type. Confirm no dead pixels, backlight bleeding, or flickering at the 60Hz refresh rate. Brightness should reach the rated 300 cd/m² level.
What comes in the box with the LP133WF4 (SP)(F1) screen and what must I source separately?
The package contains the 13.3 inch replacement display panel with the 30-pin video connector already attached. You will need to supply any mounting brackets, hinge covers, bezel clips, or adhesive strips required by your specific laptop chassis, as those are not included with the bare panel.
Which version of the LP133WF4 panel should I choose for my laptop?
Select the exact part number LP133WF4 (SP)(F1) that matches your original screen's label. This variant is a 13.3 inch Full HD 1920x1080 IPS panel with a 30-pin connector, 60Hz refresh rate, 300 cd/m² brightness, 700:1 contrast ratio, and no touch functionality. Verify the (SP)(F1) suffix before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



