We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polyurethane tubing coil 6.5mm ID 10mm OD 100ft

Atp

Atp PU10MA-BK Trap 6.5mm ID 10mm OD 100ft Black

SKU CH-QDC3-CGB02 MPN PU10MA-BK

Black polyurethane tubing with a 6.5 mm inside diameter and 10 mm outside diameter, supplied in a 100 ft coil for air or water lines

  • TypeDrain Components
  • ColorBlack
  • Polyurethane construction resists abrasion and wear for long service life
  • 5 mm inner diameter and 10 mm outer diameter suit air and water lines
  • 100 ft continuous length reduces joints and potential leak points
  • Rated to 150 psi at 140 °F for reliable high-pressure performance
  • Shore A 98 hardness balances flexibility with kink resistance

Polyurethane Tubing 6.5mm ID 10mm OD

This 100 ft roll of black polyurethane tubing has a 6.5 mm inside diameter and a 10 mm outside diameter. It is rated for a maximum operating pressure of 150 psi and a maximum operating temperature of 140 Degrees F. The material carries a Shore A 98 hardness rating and offers abrasion and wear resistance. It is designed for use with air and water applications.

Suitable for Fluid Transfer Lines

This tubing suits installers who need a flexible, abrasion-resistant line for air or water distribution in automotive or general plumbing tasks. It is not compatible with peristaltic pumps, so buyers who require pump-driven dosing or metering should look at alternative hose types. The product contains chemicals identified under California Proposition 65 as causing cancer and reproductive harm, which may restrict use in certain regulated environments.

Verify System Pressure and Temperature Limits

Before ordering, confirm that your system pressure does not exceed 150 psi and that fluid temperatures stay within 140 Degrees F. Ensure the 6.5 mm inside diameter matches the barbed fittings or push-to-connect couplings already in place. Check local regulations regarding Proposition 65 listed materials if the installation falls under applicable safety or environmental codes.

Highlights

  • Polyurethane construction resists abrasion and wear for long service life
  • 5 mm inner diameter and 10 mm outer diameter suit air and water lines
  • 100 ft continuous length reduces joints and potential leak points
  • Rated to 150 psi at 140 °F for reliable high-pressure performance
  • Shore A 98 hardness balances flexibility with kink resistance

Specifications

TypeDrain Components
ColorBlack
BrandATP
ModelPU10MA-BK

Questions about this item

What fittings do I need to connect the 6.5 mm ID tubing?

Use push-to-connect or barbed fittings sized for 6.5 mm inside diameter and 10 mm outside diameter to match the polyurethane tube dimensions.

Will the Shore A 98 hardness make it too stiff for my existing peristaltic pump?

The material is rated Shore A 98 and the specifications state it is not compatible with peristaltic pumps, so a softer tubing would be required for that pump type.

How can I confirm the tubing is handling the rated pressure after installation?

Pressurise the line up to 150 psi at ambient temperature and check for leaks or permanent expansion; the polyurethane should hold without deformation at the rated maximum operating pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.