We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red polyethylene tubing coil 100 ft length 5/32 inch ID 1/4 inch OD

Atp

Atp PE14-AR Tubing 5/32 In ID 1/4 In OD 100 Ft Red

SKU CH-VYAE-5DF5Z MPN PE14-AR

Red polyethylene tubing with 5/32 in. ID, 1/4 in. OD, 100 ft length, 150 psi rating, and -50 to 140 °F range

  • TypeDrain Components
  • ColorRed
  • FDA-compliant polyethylene for safe fluid transfer
  • 150 psi rating handles demanding pressure applications
  • Wide -50 to 140 °F range suits extreme environments
  • Tight 2 in. bend radius enables compact routing
  • 100 ft. continuous length reduces connection points

Red Polyethylene Drain Tubing

This red polyethylene tubing is supplied in a 100-foot coil with a 5/32-inch inner diameter and a 1/4-inch outer diameter. The wall thickness is 1/16 inch and the material carries a Shore D hardness of 55. It meets FDA CFR Title 21 standards for applicable uses.

Suited for low-pressure fluid lines

The tubing handles a maximum pressure of 150 psi and operates between -50 and 140 degrees Fahrenheit. Its bend radius is 2 inches, allowing tight routing in confined spaces. Builders needing higher pressure ratings, larger diameters, or different colour coding should look at alternative products.

5/32-inch inner diameter sets the flow capacity

This specific inside dimension determines the volume of fluid the line can carry. Verify that 5/32 inch matches the required flow rate and fitting compatibility for the intended drain or fluid-transfer application before purchasing.

Highlights

  • FDA-compliant polyethylene for safe fluid transfer
  • 150 psi rating handles demanding pressure applications
  • Wide -50 to 140 °F range suits extreme environments
  • Tight 2 in. bend radius enables compact routing
  • 100 ft. continuous length reduces connection points

Specifications

TypeDrain Components
ColorRed
BrandATP
ModelPE14-AR

Questions about this item

Will the 5/32 in. inside diameter connect directly to my existing 1/4 in. barbed fittings?

No, the 5/32 in. inside diameter is smaller than a 1/4 in. barb; you will need reducing couplers or clamps to join them securely.

How can I verify the tubing is rated for 150 psi after installation?

Pressurise the line to the working pressure and inspect every joint for leaks; the Shore D 55 polyethylene wall is designed to hold 150 psi at room temperature.

Does the 100 ft. red coil include any fittings or clamps?

The box contains only the 100 ft. length of red polyethylene tubing; barbed fittings, hose clamps or push-to-connect couplers must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.