ATEN
ATEN VS92A 2 Port VGA Video Splitter KVM Switch
Splits one VGA source to two monitors up to 65 metres with 1920 x 1440 resolution
- TypeD-Sub
- PC Connectors2 x HDB-15 Female (Blue)
- Console Connectors1 x HDB-15 Male (Blue)
- Computer Connections2 Ports
- Monitor Connections1 Port
- Video Resolution1920 x 1440
- Duplicates one VGA source to two displays
- Extends analog video signals up to 65 meters
- Cascadable to three levels for eight total outputs
- Delivers up to 350 MHz bandwidth for sharp images
- Compact 5.12 x 2.95 x 1.77 inch metal enclosure
Signal Distribution
The ATEN VS92A is a two-port VGA video splitter that takes a single analog source and duplicates it to two displays. It serves classrooms, trade-show booths, digital-signage runs and monitoring stations where identical content must appear on multiple screens simultaneously. The unit requires no host software and draws power from an external 9 V DC adapter.
Resolution and Reach
The splitter supports resolutions up to 1920 x 1440 and a bandwidth of 350 MHz, covering VGA, SVGA, XGA, UXGA and multisync monitors. Signal boosting extends reliable transmission to 65 m (210 ft), far beyond the typical 25 ft limit of a standard graphics card and cable. Cascading three levels expands the system to eight outputs without degrading the picture.
Analog Interface Constraints
Because the device uses HDB-15 connectors, it carries only analog RGBHV signals; digital interfaces such as DVI, HDMI or DisplayPort are not supported. The 250 MHz bandwidth ceiling means higher refresh rates at the maximum resolution may not be sustained. Buyers needing digital output, audio embedding or more than eight displays must choose a different solution.
Highlights
- Duplicates one VGA source to two displays
- Extends analog video signals up to 65 meters
- Cascadable to three levels for eight total outputs
- Delivers up to 350 MHz bandwidth for sharp images
- Compact 5.12 x 2.95 x 1.77 inch metal enclosure
Specifications
| Brand | ATEN |
|---|---|
| Model | VS92A |
| Type | D-Sub |
| PC Connectors | 2 x HDB-15 Female (Blue) |
| Console Connectors | 1 x HDB-15 Male (Blue) |
| Computer Connections | 2 Ports |
| Monitor Connections | 1 Port |
| Video Resolution | 1920 x 1440 |
| Monitors Supported | VGA, SVGA, XGA, UXGA Multisync |
| Temperature | 0ºC to 50ºC(32ºF to 122ºF) |
| Humidity | 0% to 80%,Non-Condensing |
| Power Features | DC9V, 0.85W (Max) |
| SplitterOnly | VGA Monitor Splitter only |
| Features | One video input to 2 video outputs. Long distance transmission - up to 65 m (210'). Cascadable to 3 levels- provides up to 8 video signals. Supports up to 250 MHz bandwidths. Supports VGA, XGA, SVGA, UXGA and multisync monitors All metal casing. High video resolution - 1920 x 1440 @60Hz DDC, DDC2, DDC2B Compatible (Port 1 only) |
| Dimensions | 5.12" x 2.95" x 1.77" |
| Weight | 0.71 lbs |
| Shipping weight | 1.36 kg |
| Package size | 152 × 102 × 23 mm |
Questions about this item
Will the VS92A work with my older VGA and SVGA monitors that only support lower resolutions?
The splitter supports VGA, SVGA, XGA, UXGA and multisync monitors, so your existing displays will work as long as they use standard HDB-15 connectors.
How can I confirm the VS92A is delivering the full 1920 x 1440 resolution to both screens after I connect everything?
Check each monitor's on-screen display or OS settings to verify the active resolution reads 1920 x 1440, and ensure the image is sharp across the full 65 metre cable run.
Does the VS92A package include the cables needed to connect two computers and one monitor, or must I buy them separately?
The unit provides two HDB-15 female ports for computers and one HDB-15 male port for the monitor; all three VGA cables must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.00920831BTC
In stock