Atdec
Atdec AWMS-RHXW-S mounting kit for 2 LCD displays silver
Wall-mountable medical mounting kit holds two 24-27 inch LCD displays on articulating arms with 180° swivel, tilt and pan adjustments supporting VESA 75x75 and 100x100 up to 30.9 lbs
- Mount two screens on one wall mount with 24–27 in support
- Smooth 180° swivel plus tilt and pan for flexible viewing
- Dual VESA 75×75 and 100×100 mm fit most monitors
- Aluminium build holds up to 30.9 lbs total weight
- Medical-grade wall-mount kit designed for clinical environments
Dual-display wall mounting kit
The Atdec AWMS-RHXW-S is a silver mounting kit designed to secure two LCD screens to a wall. It uses an articulating arm that provides 180° swivel plus tilt and pan adjustments. The kit supports VESA patterns of 75 x 75 mm and 100 x 100 mm. Total load capacity is rated at 30.9 lbs across both displays.
Suited for side-by-side monitor setups
This kit suits users mounting two screens between 24 and 27 inches in clinical, control-room or office environments where wall space is preferred. The single articulating arm moves both displays together, so it does not suit buyers who need independent height, depth or angle adjustment for each monitor. Installations requiring a desk clamp or pole mount should look at a different product.
Load capacity decides fit
The 30.9 lbs combined weight limit is the specification that determines whether this kit can support your chosen screens. Verify the weight of each display against this figure before purchase. If the total exceeds the limit, the arm cannot hold the configuration safely.
Highlights
- Mount two screens on one wall mount with 24–27 in support
- Smooth 180° swivel plus tilt and pan for flexible viewing
- Dual VESA 75×75 and 100×100 mm fit most monitors
- Aluminium build holds up to 30.9 lbs total weight
- Medical-grade wall-mount kit designed for clinical environments
Specifications
No published specifications for this item yet.
Questions about this item
What wall structure is required to mount the 30.9 lbs dual-display kit?
The kit is wall-mountable and uses an articulating arm; secure it to studs or solid masonry that can carry the full load.
Which step is often missed when setting the 180° swivel stops?
After mounting the arm, tighten the swivel-limit screws at the desired angles before attaching the displays.
When should the VESA 75 x 75 mm and 100 x 100 mm hardware be checked?
Inspect the mounting screws every six months and retighten if any display movement is noticed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
