AstroAI 66639E QuickFill 120V AC Electric Pump 650 L/min
Inflates and deflates air mattresses and pool floats with 650 L/min airflow from a 120V AC outlet, includes three interconnecting nozzles and thermal protection
- TypeCentrifugal & Water Pumps
- Inlet SizeElectric Air Pump
- Outlet SizeElectric Air Pump
- MaterialPlastic
- Maximum GPM650 liters_per_minute
- Compatibility/FitmentAdhesives; Enamels; Epoxies
- Plug into standard 120V AC outlet for indoor inflation tasks
- Three interconnecting nozzles fit a range of valve sizes on air mattresses and pool floats
- 650 L/min maximum airflow inflates large items quickly
- Built-in thermal protector shuts off the motor before it overheats
- Sold as a 12-unit case for multi-pack convenience
Indoor inflation pump for household inflatables
The AstroAI 66639E QuickFill is a 120 V AC electric pump designed for indoor inflation and deflation of air mattresses, pool floats and similar items. It delivers up to 650 litres per minute of airflow and includes three interconnecting nozzles to fit a range of valve sizes. A built-in thermal protector shuts the motor off before it reaches a dangerous temperature. The compact plastic housing measures 12.5992 cm x 14.4 cm x 14.6 cm.
Mains-only power limits portability
Because the unit draws 120 V alternating current from a wall outlet, it cannot be used where mains power is unavailable. The supply cord restricts reach to the length of the cable and any safe extension lead. Continuous operation is limited by the thermal protector, which will pause the pump if the motor overheats. Maximum airflow of 650 L/min applies only at free-air conditions; back-pressure from smaller valves will reduce the effective rate.
Check valve fit and outlet access before ordering
Verify that the three supplied nozzles match the valves on your inflatables, as no additional adapters are included. Confirm a standard 120 V AC socket is within practical reach of the inflation site. Ensure the intended use is indoors, as the pump is not rated for outdoor exposure. The case contains twelve units, so consider whether you need a single pump or the full pack.
Highlights
- Plug into standard 120V AC outlet for indoor inflation tasks
- Three interconnecting nozzles fit a range of valve sizes on air mattresses and pool floats
- 650 L/min maximum airflow inflates large items quickly
- Built-in thermal protector shuts off the motor before it overheats
- Sold as a 12-unit case for multi-pack convenience
Specifications
| Type | Centrifugal & Water Pumps |
|---|---|
| Inlet Size | Electric Air Pump |
| Outlet Size | Electric Air Pump |
| Material | Plastic |
| Maximum GPM | 650 liters_per_minute |
| Compatibility/Fitment | Adhesives; Enamels; Epoxies |
| Frequency Hz | not_applicable |
| Current Type | DC |
| Input Voltage | 120 volts_of_alternating_current |
| Phase | AC, 120 volts_of_alternating_current |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Size/Dimensions | 12.5992 cm x 14.4 cm x 14.6 cm |
| Item Count | 12 pack |
| Selling Unit | Case |
| Parts | 1 Year |
| Labor | 1 Year |
| Brand | AstroAI |
| Model | Hand Rivet Nut Setter Kit |
| Part Number | 66639E |
Questions about this item
Should I choose the 66639E or one of the other model numbers like 66633E or 66643E?
The 66639E delivers 650 L/min airflow using a 120V AC wall plug, ideal for indoor inflatables. The 66633E offers 480 L/min on the same power, while the 66643E provides 1,100 L/min for larger items.
What does the 650 L/min airflow figure mean when I am inflating a mattress?
At 650 litres per minute, a typical queen air mattress reaches full firmness in roughly two to three minutes, so you spend less time waiting and more time resting.
The pump uses a 120V AC plug — what does that limit in practice?
It restricts use to standard household outlets, so you cannot run it from a car 12V socket or battery pack; an extension lead is needed for any outdoor setup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



