Astro Gaming
Astro Gaming 30W Gigabit PoE Splitter 5/9/12/18V 2 in 1 Accessory
Splits Gigabit PoE into data and switchable 5V, 9V, 12V or 18V DC power for non-PoE devices
- Delivers gigabit data and 30 W PoE power
- Switchable 5 V, 9 V, 12 V or 18 V DC output
- Accepts 36–57 V PoE input per IEEE 802.3 af/at
- LED shows active voltage for quick monitoring
- Plug-and-play powers IP cameras, APs, VoIP phones
Power and data from one cable
This splitter separates a single PoE connection into gigabit Ethernet and a DC output. It accepts IEEE 802.3 af/at input in both Mode A and Mode B across a 36-57 V range. The unit delivers switchable 5 V, 9 V, 12 V or 18 V power through a DC jack.
Installers running non-PoE gear
Ideal for powering IP cameras, microphones, access points or VoIP phones that lack native PoE support. No configuration is needed and an LED shows the selected voltage. Devices requiring more than 30 W or a different voltage step cannot use this adapter.
30 W total power budget
The splitter is limited to 30 W maximum throughput, divided as 5 V 3 A, 9 V 2.5 A, 12 V 2.4 A or 18 V 1.6 A. Any device drawing more current than the chosen rail provides will not operate reliably.
Highlights
- Delivers gigabit data and 30 W PoE power
- Switchable 5 V, 9 V, 12 V or 18 V DC output
- Accepts 36–57 V PoE input per IEEE 802.3 af/at
- LED shows active voltage for quick monitoring
- Plug-and-play powers IP cameras, APs, VoIP phones
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the splitter is delivering the correct voltage to my device after connecting it?
The LED indicator on the unit lights up to show which of the four output voltages — 5 V, 9 V, 12 V or 18 V — is currently active, letting you verify the setting at a glance.
What comes in the box and is there anything else I need to buy to use it?
The splitter itself is supplied; you will need a PoE switch or PoE injector that provides 36–57 V DC per IEEE 802.3 af/at, plus an Ethernet cable for the data link and a DC jack cable suited to your device.
Which output voltage should I select for my equipment?
Choose the voltage that matches your device’s requirement — 5 V at up to 3 A, 9 V at up to 2.5 A, 12 V at up to 2.4 A or 18 V at up to 1.6 A — and set the switch accordingly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
