We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black coiled D-tap power cable with 2-pin Lemo connector, 60cm length

Astro Gaming

Astro Gaming 2 in 1 accessory 60cm D-tap 2 pin power cable

SKU CH-EYAA-7S26B

A 60 cm D-tap power cable connects V-lock or Gold-mount batteries to monitors, receivers and cameras using a 2-pin Lemo-compatible plug for 12/24 V operation

  • Powers monitors and cameras from V-lock or Gold-mount batteries
  • 60 cm super-flex cable reaches gear without strain
  • D-tap to 2-pin Lemo-compatible connector fits ARRI-standard pinout
  • Supports 12 V and 24 V equipment across multiple brands
  • Compatible with Teradek Bolt, Preston MDR, SmallHD 703 and Z CAM systems

2-in-1 D-tap Power Cable

The Astro Gaming 2 in 1 accessory is a 60cm D-tap 2 pin power cable built for professional video production rigs. It connects V-lock or Gold mount battery packs to monitors, wireless receivers and cameras that use a Lemo-compatible FGG.0B.302 2 pin male connector. The super flex soft cable suits on-set mobility and tight cable runs.

Thermals Noise and Power Draw

The cable carries 12/24V power with ARRI standard wiring: Pin1 Ground, Pin2 Power. Passive construction means no fan noise and no added thermal load to the system. Voltage drop over the 60cm length is minimal for typical monitor and receiver current draws.

Replaces Proprietary Power Leads

This single cable replaces multiple proprietary power leads for devices such as SmallHD 703 monitors, Teradek Bolt and Bond receivers, Preston MDR3 and LR2 units, Z CAM E2 series cameras and various EVF viewfinders. The jump is worth it when a crew needs one flexible D-tap cable to power several compatible devices from a single battery plate.

Highlights

  • Powers monitors and cameras from V-lock or Gold-mount batteries
  • 60 cm super-flex cable reaches gear without strain
  • D-tap to 2-pin Lemo-compatible connector fits ARRI-standard pinout
  • Supports 12 V and 24 V equipment across multiple brands
  • Compatible with Teradek Bolt, Preston MDR, SmallHD 703 and Z CAM systems

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 60 cm D-tap power cable without reversing polarity on the 2-pin Lemo connector?

Plug the D-tap end into the battery plate first, then insert the FGG.0B.302 male connector into the monitor or camera; Pin 1 is ground and Pin 2 carries 12/24 V power per ARRI standard wiring.

What maintenance or replacement will the super-flex soft cable need over time?

Inspect the 60 cm jacket and strain reliefs before each shoot; replace the cable if the insulation shows cuts, the D-tap latch wears loose, or the 2-pin Lemo pins become bent.

What limit appears first when powering a 12/24 V monitor continuously through this cable?

The 2-pin Lemo connector and D-tap contact rating set the current ceiling; sustained loads near their maximum will heat the contacts before the 60 cm conductor does.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.