We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New projector lamp module with Philips SHP 200W bulb inside black housing

ASK Proxima, Inc.

ASK Proxima, Inc. Infocus IN20 OEM Replacement Projector Lamp with Philips SHP 200W Bulb and Housing

SKU CH-YPKN-MRHP3

Replacement lamp module with Philips SHP 200W bulb and housing delivers 2,500 to 3,000 hours for Infocus IN20 projectors

  • TypeSHP
  • Wattage200W
  • Lamp Life2,500 (Normal) - 3,000 (Economy) Hrs.
  • Genuine Philips SHP 200W bulb ensures precise colour and brightness
  • Ready-to-install housing module saves setup time
  • 2,500 normal / 3,000 economy hours extends replacement intervals
  • Manufactured to ISO 9001 quality standards for reliable ignition
  • OEM-compatible design fits Infocus IN20 projectors (SP-LAMP-039)

Replacement Lamp for Infocus IN20

This new OEM replacement lamp module fits the Infocus IN20 projector and arrives with a Philips SHP 200W bulb already mounted in its housing. It is intended for owners who need a direct, ready-to-install replacement when the original lamp reaches end of life. The unit is supplied new and fully assembled.

200 Watt Philips SHP Bulb

The lamp uses a 200W Philips SHP bulb rated for 2,500 hours in normal mode and 3,000 hours in economy mode. Matching this wattage and lamp type is the single specification that determines whether the module will operate correctly in the IN20. No other wattage or bulb technology is supported by the projector.

Pre-Assembled Housing for Direct Swap

Because the bulb comes pre-installed in the housing, installation requires only opening the projector lamp door, removing the old module, and sliding the new one into place. The most common issue is forgetting to reset the projector lamp timer after replacement, which leaves the replacement warning active.

Highlights

  • Genuine Philips SHP 200W bulb ensures precise colour and brightness
  • Ready-to-install housing module saves setup time
  • 2,500 normal / 3,000 economy hours extends replacement intervals
  • Manufactured to ISO 9001 quality standards for reliable ignition
  • OEM-compatible design fits Infocus IN20 projectors (SP-LAMP-039)

Specifications

BrandInFocus
TypeSHP
Wattage200W
Lamp Life2,500 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

How long will the 200 W Philips SHP bulb actually last in my Infocus IN20?

The lamp is rated for 2,500 hours in normal mode and up to 3,000 hours when the projector runs in economy mode.

Does the SP-LAMP-039 module use the standard Infocus lamp connector and housing dimensions?

Yes, it is a fully assembled OEM replacement designed to match the original Infocus housing and plug directly into the IN20 projector.

What physical space do I need to install this lamp module in the projector?

The unit ships as a complete bulb-and-housing assembly that fits the existing IN20 lamp compartment without any extra brackets or adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.