Ashland Conveyor
Ashland Conveyor ZORO SELECT 5W814 H-Stand conveying 16BF 19-31 in 500 lb
H-stand conveyor support holds 16 in frames, adjusts 19 to 31 in high, and carries 500 lb load
- Supports 500 lb loads with steel H-stand construction
- Adjustable height from 19 to 31 inches for flexible conveyor alignment
- Fits 16-inch between-frame width for standard conveyor compatibility
- 17-inch overall width provides stable permanent-mounted support
- Green powder-coat finish resists corrosion in industrial environments
ZORO SELECT 5W814 H-Stand Conveyor Support
The ZORO SELECT 5W814 is a permanent-mounted conveyor H-stand built for light- to medium-duty material handling. It supports a 16 inch between-frame width and carries a 500 lb stand load capacity. The stand is made of steel with a green finish and measures 17 inches overall width.
Installation and Common Issues
Permanent mounting requires bolting the stand securely to the floor or support structure, so alignment must be checked before drilling. The adjustable height range of 19 to 31 inches allows levelling on uneven surfaces, but incorrect shimming can lead to belt tracking problems. Ensure the frame width matches the 16 inch specification to avoid roller misalignment.
Suitable Applications and Limitations
This stand suits operations needing a fixed-height support for conveyors with a 16 inch between-frame width and loads up to 500 lb. It is not intended for heavy-duty or high-impact loading environments. Buyers who need a wider frame width, a higher load rating, or a portable stand with casters should look at alternative support designs.
Highlights
- Supports 500 lb loads with steel H-stand construction
- Adjustable height from 19 to 31 inches for flexible conveyor alignment
- Fits 16-inch between-frame width for standard conveyor compatibility
- 17-inch overall width provides stable permanent-mounted support
- Green powder-coat finish resists corrosion in industrial environments
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How can I verify the H-stand is holding its rated 500 lb capacity after permanent mounting?
Confirm the stand is level, the permanent mounts are fully tightened to the floor, and the conveyor frame sits evenly across the 17 in overall width without deflection.
What components are included with the ZORO SELECT 5W814 H-stand and what must be sourced separately?
The stand ships as a complete green steel H-frame for 16 in between-frame width; floor anchors and any conveyor sections are not included.
Which height setting should I choose for a conveyor line that needs to sit between 19 and 31 in high?
The stand adjusts continuously from 19 to 31 in; set the legs to the exact elevation your workflow requires within that range.
More in Lifting, Pulling & Conveying
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
