Champion Power Equipment
Champion Power Equipment C90018 generator cover grey 2000 series
- Generators
$18.99
0.00022855BTC
In stock
Ashcroft
Ashcroft G2 Pressure Transmitter -15 to 30 psi 1-5V DC
Measures vacuum to 30 psi with 1-5 V DC output, DIN 43650 connector, 3-wire 9-36 V DC supply, NEMA 4X and IP65 rated from -40 to 257 °F
- Measures vacuum to 30 psi with 1-5V DC output
- Accuracy held to ±0.50% full scale for reliable readings
- NEMA 4X and IP65 ratings protect against dust and water jets
- Operates from -40 °F to 257 °F in harsh environments
- Powered by 9-36V DC with three-wire DIN 43650 connector
Pressure transmitter for vacuum-to-30-psi systems
This Ashcroft G2 pressure transmitter measures from minus 15 psi up to 30 psi and outputs a 1 to 5 V DC signal. It suits process and outdoor power equipment that need a compact transducer with a DIN 43650 Form A electrical connector and a male 1/8 in NPT process connection.
Output range and accuracy define fit
The transducer delivers a linear 1 to 5 V DC output across the full vacuum-to-30-psi span with an accuracy of +/- 0.50 percent full scale. A three-wire design operates on a 9 to 36 V DC supply, so the single electrical specification that decides compatibility is the required output voltage range and supply window.
Rated for harsh environments
The housing carries a NEMA 4X rating and an IP65 ingress rating, sealing the electronics against wash-down and dust. It operates continuously from minus 40 degrees F to 257 degrees F, and the cable-gland wiring entry maintains the seal during normal use without adding audible noise or significant power draw.
Highlights
- Measures vacuum to 30 psi with 1-5V DC output
- Accuracy held to ±0.50% full scale for reliable readings
- NEMA 4X and IP65 ratings protect against dust and water jets
- Operates from -40 °F to 257 °F in harsh environments
- Powered by 9-36V DC with three-wire DIN 43650 connector
Specifications
| Brand | ASHCROFT |
|---|
Questions about this item
What does the -15 to 30 psi range mean when the transmitter is installed on a pressure washer?
The transmitter reads vacuum down to -15 psi and positive pressure up to 30 psi, so it covers both suction and discharge sides of the pump.
How does the DIN 43650 Form A connector limit the output signal in practice?
The three-wire DIN 43650 Form A plug carries the 1 to 5 V DC output and the 9 to 36 V DC supply, fixing the voltage interface to that pin layout.
What mounting hardware does the 1/8 in male NPT process connection require?
It threads directly into a 1/8 in female NPT port; no flange or adapter is needed beyond standard pipe sealant or tape.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
