We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cylindrical pressure transmitter with cable leads

Ashcroft

Ashcroft G17M0215F2300# Pressure Transmitter 0-300 psi 1-5V DC

SKU CH-M15S-F4H71

Measures 0 to 300 psi and outputs 1 to 5V DC with ±0.50% accuracy, NEMA 4X and IP67 sealing, and a 1/4 in NPT male connection

  • TypeElectronic
  • Accurate monitoring with ±0.50 % full-scale precision
  • Wide 0–300 psi range covers diverse pressure tasks
  • Rugged NEMA 4X and IP67 housing resists harsh environments
  • Operates reliably from –40 °F to 257 °F
  • Flexible 9–36 V DC supply simplifies integration

Pressure range 0 to 300 psi

The Ashcroft G2 series transmitter measures gauge pressure from 0 to 300 psi and converts it to a 1 to 5V DC signal. It operates on a 9 to 36V DC supply with a three-wire connection. The housing is nylon and carries NEMA 4X and IP67 ratings for harsh environments.

Suited for voltage-input systems

This unit fits data loggers, PLCs and panel meters that accept a 1 to 5V DC input. Its 1/4 inch male NPT process connection suits standard hydraulic or pneumatic ports. Buyers who need a current-loop output or a different pressure span should consider other options.

Output signal 1 to 5V DC

The defining specification is the 1 to 5V DC output, which must match the analogue input range of the receiving instrument. Accuracy is stated as +/- 0.50 percent full scale across the -40 to 257 degrees F operating range.

Highlights

  • Accurate monitoring with ±0.50 % full-scale precision
  • Wide 0–300 psi range covers diverse pressure tasks
  • Rugged NEMA 4X and IP67 housing resists harsh environments
  • Operates reliably from –40 °F to 257 °F
  • Flexible 9–36 V DC supply simplifies integration

Specifications

BrandASHCROFT
TypeElectronic

Questions about this item

What power supply must I already have to run the 9 to 36V DC transmitter?

You need a DC source that can deliver between 9 and 36 volts; the unit draws power through its three-wire cable leads.

Will the 1/4 in male NPT process connection thread into the same port as my existing 1/4 in NPT fittings?

Yes, the male 1/4 in NPT thread mates directly with standard 1/4 in female NPT ports, so existing plumbing can be reused.

How can I verify the 1 to 5V DC output is tracking pressure correctly after installation?

Apply a known pressure, then measure the output voltage; it should sit at 1 V at 0 psi and rise linearly to 5 V at 300 psi within the ±0.50 % full-scale accuracy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.