ARTU USA INC
ARTU USA INC 01274 SDS Plus Drill Bit 5/8" x 6.000"L
SDS Plus drill bit with a 5/8 inch diameter and 6.000 inch length for rotary hammer drilling
- SDS Plus shank fits compatible rotary hammers for secure locking
- 5/8 inch diameter drills precise holes in masonry and concrete
- 000 inch overall length reaches deeper into workpieces
- ARTU brand manufactured for professional power tool accessory use
- New condition ensures full factory performance from first use
SDS Plus Drill Bit 5/8
The ARTU 01274 is an SDS Plus drill bit with a 5/8" diameter and 6.000" length. It is built for rotary hammers that accept the SDS Plus shank system. Trade professionals and serious DIY users drilling into concrete, masonry or stone will find it suited to anchor installation and through-hole work.
Check shank compatibility
Verify that your rotary hammer uses an SDS Plus chuck before ordering. The bit will not fit SDS Max, spline or standard three-jaw chucks without an adapter. Confirm the tool’s maximum bit diameter capacity covers 5/8" and that the 6.000" overall length suits your drilling depth requirement.
Heat and wear in use
Carbide-tipped flutes dissipate heat during normal hammer drilling, keeping the cutting edges stable. The SDS Plus interface transmits impact energy directly, reducing vibration and operator fatigue. Expect consistent material removal with minimal binding when the bit is kept sharp and the tool is run at recommended speeds.
Highlights
- SDS Plus shank fits compatible rotary hammers for secure locking
- 5/8 inch diameter drills precise holes in masonry and concrete
- 000 inch overall length reaches deeper into workpieces
- ARTU brand manufactured for professional power tool accessory use
- New condition ensures full factory performance from first use
Specifications
| Brand | ARTU |
|---|
Questions about this item
Does the ARTU 01274 SDS Plus drill bit come with any extra accessories or do I need to buy a compatible chuck separately?
The product is a single SDS Plus drill bit measuring 5/8" x 6.000"L; no additional accessories are included and a compatible SDS Plus rotary hammer is required for use.
What do the dimensions 5/8" x 6.000"L tell me about which version of this bit to choose?
The 5/8" diameter and 6.000" overall length define this specific model; choose it when you need a hole of that exact width and depth in concrete or masonry.
How does the 5/8" diameter perform when drilling into reinforced concrete with an SDS Plus rotary hammer?
The 5/8" carbide tip cuts clean holes in reinforced concrete when driven by an SDS Plus rotary hammer, delivering the precise diameter specified for anchor installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
